|
Bronze Member Username: SeriusMiami, FL USA Post Number: 46 Registered: Feb-06 | Ok i just got my Re 12.1 and im gonna install everything... what settings do i set the LPF, Gain, sub-sonic...its goin to power 2 RE SE 15's with a Jvc Kd Ar360 (temp) its has two pre outs rated at 2.5v and i have a remote bass boost knob..any more info just ask THX!!! |
|
Silver Member Username: Terry6405Sullivan, IN US Post Number: 728 Registered: Sep-05 | LPF around 80hz, gain, 2.5 volts (to match for HU), and what kinda box do have? that is how you tell where to set your sub-sonic |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 47 Registered: Feb-06 | sealed |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 48 Registered: Feb-06 | the thing is there isnt numbers..what bout the bass boost? |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 49 Registered: Feb-06 | i figured the lpf out and sub sonic number wise..but not the gain also there is a "phase" setting which i dont kno wut it does |
|
Silver Member Username: Terry6405Sullivan, IN US Post Number: 729 Registered: Sep-05 | look in the maual to see what the range is, then just guess, thats about the best bet unless you have a DMM dont go crazy with the bass bost, half is plenty |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 50 Registered: Feb-06 | aight thanks ill figure it out...do you know that the "phase" control does? |
|
Silver Member Username: GagePost Number: 253 Registered: Feb-06 | no i wouldnt turn it on isnt it every 3dbs of bass boost your asking the amp to produce twice as much more power than usual? (not sure but i think its something like that) |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 51 Registered: Feb-06 | and sub-sonic? |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 52 Registered: Feb-06 | theres 5 blocks and the range on the gain is 0.2-8v |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 55 Registered: Feb-06 | bump? |
|
Bronze Member Username: TonPost Number: 86 Registered: Jul-05 | it is a seal box, you shouldn't worry much about the subsonic filter. |
|
Bronze Member Username: Emdawg12345Post Number: 27 Registered: Jan-06 | just read this its got all the info u need http://www.rotteneggs.com/?refid=182315 |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 56 Registered: Feb-06 | so i just turn it off then..but what about that phase buton what do i set it at? Thanks |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 58 Registered: Feb-06 | bump |
|
Bronze Member Username: SeriusMiami, FL USA Post Number: 59 Registered: Feb-06 | bump |