Port Tuning

 

New member
Username: Savonis

Post Number: 1
Registered: Apr-04
Is it possible to tune a port to too low of a frequency? And if so, whats a good frequency range to shoot for?

 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 2515
Registered: Dec-03
yes, very possible, and you want the ports tuned to ~35Hz for low bass, 45Hz for punchy rap music type bass, or to the resonant frequency of the car's cabin for max SPL.
 

New member
Username: Savonis

Post Number: 3
Registered: Apr-04
so is 26 Hz too low?
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 2527
Registered: Dec-03
you could use 26Hz, but you don't want to tune the box to below or even at the Fs of the subs.
it causes problems.

go for 35Hz

the roll off from there will still hit pretty hard down to about 20Hz easily
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us