| Hi people! I wonder if you could help me. Im trying to setup a car audio entertainment. I do not want a very loud sound, what I want is more on acoustic/jazzy type of sound and would like to hear the very specific and defined treble sound aswell as far as bass sound is concerned. At the moment I have got a Sony MDX unit head. What are the kind of speakers that I should have and amplifier to get the quality of sound that I am looking for. Should I put a subwoofer for this setup? In connection with this, I do not want to setup a very expensive accessories, average or above average would do. Thank you very much in advance |
| Is this for a sedan or a hatch back Carlo? |
| i have a pioneer stereo andit is a keh 1100 the serial no. is qho70550 i need to hooke it up to my 93 cavalier i need the wire diagram thank you |
| I have a 98 Isuzu Rodeo with the factory AM/FM Cassette player Apparently there are 6 speakers- 2 small ones in the front doors above the power window controls, 2 medium sized at the lower door panel of the front door, and 2 at the rear above the flipout back door glass. I would like to go to a CD player and maybe up grade the speakers for a better sound, yet not have to throw large sums of money at the problem. Re the CD player, would it make sense to get a wireless CD changer so I could keep the Cassette player as well? Thanks for your help. |
Unregistered guest | i,m doing a school project on setting up a car audio system, ie managing the sound, including the use of tweeters, midrangers, and subwoofers to enhance quality and overall performance ( im also concidering a setup in my own car('90 lancer hatchback) which would be influenced by feedback) assuming im starting from scratch with a limitless budget wat would be my best options for some superior sound ( i mostly listen to hip hop/ hard house/ and dance beats. thanx |
Unregistered guest | hey i would update my soundsystem, i have now the KDC2024A headunit from Kenwood and the speakers are from Pioneer front= costum fit TS-H871 and back the TS-A2010. What should i buy best? i have a VW golf 2 and not much money if you know what i mean! the sound i want is very good qualty with a limited budget( the music i listen mostly is metal and gothic metal and sometimes to hardcore rock) |
New member Username: TrevorPretoria, Western Cape South Africa Post Number: 2 Registered: Apr-04 | hi does anyone know to what wire i must connect my dimmer wire of my stereo. please reply. |
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 2985 Registered: Dec-03 | to the dimmer wire of your car's harness, if it has one. otherwise leave it disconnected. |
Carlos Unregistered guest | Hello! Escuse me about my sppelling, i'm from Portugal, and my English it's a little bitt bad. I've bought a second hand car, now i've to buy a new batery and the radio stopped working, it as got the message "safe" appearing, ok, i now i've to put the code, but i'don't now how to do it, I now the code. Anyone know how to enter the code? I don't hve the manual. It's a Philips Car 400. |
JuanG.A Unregistered guest | Hi carlos you have to conect the ignition key to position where all ligths on board are on. then press AS key and turn on the radio, pressing AS,when you heard a beep, release AS key, put the code and press newly AS for 3 seconds, good luck what car you have? I have an Opel Omega , if you have the same please write me, I need Owners Manual in pdf, I have your manual for "interchange" |
Anonymous | Hi Juan, I've an Opel Omega "b" with Philips Car400. Unfortunately the radio has introduced on the "safe mode". I read with interest the indications that you given to Carlos but my question is this: in my code number there is an "8" and one "0 (zero)". How can I introduce these numbers if the keyboard of the radio has alone 6 numbers? Thanks and excuse for my bad English. Jerry (Rome-Italy) |
New member Username: KaanPost Number: 1 Registered: Jul-04 | carlos, each time you enter a wrong number waiting period extends. so be careful. if the first number in your code is 5, you have to press 1 five times. if the second number is 8 press 2 eight times and so on. |
New member Username: ChuckiePost Number: 1 Registered: Aug-04 | Hi I have just acquired a pioneer keh-2200 to be instaled in a van. Unfortunately it hasn't got a wiring diagram. I think it could be similar to others in that range. Can someone plase help |
Unregistered guest | Hi, Please help me wih the following problem: I have an Opel Omega with Philips radio. I am able to enter the radio code as "JuanG.A" described and it works pretty fine but I don't know how to enter the code for the cd-changer(Blaupunkt). After playing around with the radio it even doesn't recognize the cd-changer anymore. Can you help? Thanks |
Anonymous | i have a standard renault megane coupe philips head unit and 6 disc changer .. but want to upgrade my head unit to run an amp .. but not have to replace my changer or steering wheel controls .. any ideas??? Make and model of a philips head unit? |
Unregistered guest | Hi, i currently have a pioneer headunit45x4 fairly new with a complete front splits 220 and back 180 system. I want to add an amp and sub, What size amp would be preferred with probably a 10 - 12inch 400 - 500W sub ? |
Anonymous | a 400-500 watt amp. next time please start a new thread instead of bring these old ones back. |
New member Username: WerewolfPost Number: 1 Registered: Sep-04 | Does Anyone know how I should behave when the display of the philips car 400 shows "7 safe". A wrong code was inserted many times and pressing the AS key the radio is never ready to accept the code. Hi, salvatore(Italy) |
Unregistered guest | help, I have a 2004 Suzuki Verona car and I disconnected by battery and my car stereo now says i need a code. can anyone help. and how do you enter a "O" when there is no zero on the faceplate???? the stereo is made by Daewoo part #96494285 Email if you can.. thank you all thanks |
Unregistered guest | Hi all! If you have manual for Philips Car 400, please, send me... I need your help! |
Silver Member Username: JayjLouisiana USA Post Number: 526 Registered: May-04 | Why don't you try contacting the company? |
Unregistered guest | Does anyone know how to adjust the time on a Clarion DRB4475 radio/CD. This is the one that has the removable faceplate. |
Bronze Member Username: FishyPost Number: 12 Registered: Sep-04 | Try these two manuals: http://www.teamclarion.com/sharedwebdbs/clarionsupport.nsf/b519d112bdcca8b588256 a630071fab1/62cdb2bec3c4da7388256ac00083739c/$FILE/DRB3475%20.pdf http://www.teamclarion.com/sharedwebdbs/clarionsupport.nsf/b519d112bdcca8b588256 a630071fab1/53610bb0219f07f888256ac0008380c2/$FILE/drb4675.pdf Sorry, they didn't have a manual for that exact model, but I bet these two are close. -Fishy |
Unregistered guest | For anyone who's car stereo shows any kind of safe or lock, it's the stereo's anti-theft circuitry at work. There should be a code if you don't know it in the manual or on a sheet of paper from the dealer/seller. My mother had a Volvo and it had a anti-theft device that would lock the stereo up every time the battery ran dead. If you can't find the code, contact the manufacturer of your vehicle, and they can help you. |
Unregistered guest | help,help,help, i need a code number for 2000 mitsubishi eclipse RX can anyone help me? thank you so mcuh |
C. Olivier Unregistered guest | Hi everyone, I have a Philips Car400 (100% clean) and I need a code number for it. S/N: GM0400Y2718999. If anyone can help me I'll appreciate. Thanks in advance, C. Olivier |
Unregistered guest | hi. my question is how to get back the casette/tuner that originally comes with 1994 chrysler grand voyager if it asks for i guess 5 digit code, after running down the batteries? i think noone will answer me if im contacting chrysler factory... |
Silver Member Username: FishyTamarac, FL USA Post Number: 111 Registered: Sep-04 | You might try a dealership. They could probably at least steer you in the right direction. -Fishy |
Unregistered guest | HI TO ANYONE WITH SECURITY CODES NOT KNOWN ON THEIR HEAD UNIT. I HAVE JUST HAD THAT PROBLEM IN MY RENAULT SCENIC. I CONTACTED MY NEAREST RENAULT DEALER, GAVE THEM MY VEHICLE DETAILS, VRN & CHASSIS No. AND WITHIN 10 MINS I WAS GIVEN THE CODE FOR MY UNIT. PLEASE NOTE THIS CODE WILL BE FOR THE ORIGINAL UNIT FITTED. IF THE CODE WAS CHANGED BY A PREVIOUS OWNER FOR SOME REASON THEN THIS OPTION IS OF NO USE. GOOD LUCK! |
help Unregistered guest | Hi im just wondering if anyone knows how to hook up a second amp to my car |
Unregistered guest | Hi Guys! I'm Jepoy from manila. I recently installed amps for my car wired to two 12 in subs. The system works fine when the engine is not running. But everytime I started the engine and turn on the system the subs pick-up the sounds, like humming static noise. Someone suggested I seperate the RCA cable from the 8 ga power cable which I did. But the noise is still present. Pls help me out. |
Bronze Member Username: Rmike21561Maryland USA Post Number: 13 Registered: May-04 | try moving the ground wires to another location |
SteveP Unregistered guest | Hi, I have just aquired a phillips combined cd/radio/cassette from a renault safrane, but after putting it in mine all i get is five suares on the display (Ithink its the graphic equilizer) I have the code but don't know how to put it in? |
Anonymous | Hi, I have a Opel Vectra -97 that just been to the garage. They had to disconnect my battery and now my radio does not work anymore. It is a Philips Car 400, 1614438 Philips, GM90506173, >PA6-GF15>. Can anyone help me with the security code or a dump? |
Silver Member Username: FishyTamarac, FL USA Post Number: 269 Registered: Sep-04 | I'd call that garage and make it their problem. -Fishy |
middenrat Unregistered guest | thanks to JuanG.A and kaan saganak for the correct instructions for input of code, phillips car stereo. i'm running a vauxhall (GM) vectra as a taxi, so they have made my day ![]() |
Anonymous | Again thanks JuanG.A and kaan saganak for the instructions. My CAR 400 radio has suddenly 'crashed'. It stopped playing, info display was always switched on showing the time but no date, even when I have turned off my Zafira and removed the ignition key. There was no response to any keypress on the control panell. I got the feeling that the processor inside the radio has locked up. I had to disconnect the power by removing a 20A fuse for a few seconds. After reconecting the power, I got the radio working again but there was a 'SAFE' on a display and I did not figure it out, how to enter the CODE. Thanks again you guys, you have made me very happy today. |
Anonymous | help! i have a honda passport to which i'm adding a amplifier, i would like to know which wire in the harnest is the turn on lead for the amplifier.i have a six disc changer below the radio, i tried the blue antenna wire but when i turn on the radio the amp goes out and there is no sound coming from the speakers, everything is fine when playing the cd changer. please help!!! |
Unregistered guest | I installed my Philips Car 400 from my old car to a new one. Problem is, the power supply is cut whenever I turn off the key, and every time I need to restart the radio set by its code. This is getting boring. Does anyone know how should I cable up, to keep the power on even when the ignition key is turned off? Thank you |
Anonymous | I've a Philips Car 400 2F3 and I need to install it in my new car. Can you help me please? I think I need the manual... |
Unregistered guest | Hi I need code for my Philips 09 136 106 CAR 400 GM040013010311 thanks |
Unregistered guest | Need a code for my Philips Car 400 (Opel) , i don't know the serial number (The label is broken). Can anybody halp me please ? |
New member Username: YorkyredPost Number: 1 Registered: Nov-04 | Hi ihave a philips car400 when i press as to enter code it says 7 safe anyone got any ideas what this means and how to sort it any help appreciated thankyou in advance |
New member Username: KaanPost Number: 2 Registered: Jul-04 | geoff, you better disconnect the battery and start the whole procedure from the very beginning. 7 safe means that you entered wrong numbers 7 times. each wrong entry block the radio for a while and expands the waitng period dramatically. |
Unregistered guest | Hi, I've a philips car 400 on my Opel Tigra. Because of a battery cut-off I need to enter the code. But radio did not accept the right code for 5 times. Does anyone knows a procedure to make the radio on again. Thanks for your assistance. |
New member Username: YorkyredPost Number: 2 Registered: Nov-04 | re philips 400 when you press as and turn the radio on what does it say as i have just solved mine which said 7 safe email me and i will tell you after i know what it says how to sort it |
Pim de Vente Unregistered guest | Oguz, I just had to reenter the code: The actions to enter the security code into the Philips CAR400 are as follows: 1) Make contact 2) Turn the radio off (if it is on) 3) Keep button SA pressed while turning on the radio (main button) 4) After 3 seconds the display changes to 10 _ _ _ _ (Unless you've tried to enter a code before. Then it will show 9 "SAFE" for a few seconds. After 2 tries the wait is 10 minutes!) 5) Now the display looks something like this: 10 _ _ _ _ 6) Use the station select button 1 to enter the first digit: Click 1 time for 0, 2 time for 1, etc. (If you overshoot the desired number keep on pushing: after 9 it starts with 0 again) 7) User button 2 for the second digit. Sames goes for button 3 and 4. 8) Make sure the display has the correct secutity code (Something like this: 10 1 2 3 4) 9) Now press button SA again for about 3 seconds. The radio will start up (or if the code is not accepted: 9 _ _ _ _) If after 6 attemps the code is still not accepted, contact a dealer! |
Lig Unregistered guest | I have a Blaupunkt CD Changer fitten on my Opel Vectra(I think it's a factory fit).The CDC is in my Glove Compartment.Recently I changed the battery.Ever since, the radio and Cassette player have been perfect.But the CD Player gives a beep sound every 3 seconds and displays CD-SAFE.I have the code to the player and tried to input the code to No Avail.I dont have the manual of the player though.Pl help |
New member Username: Langless28Post Number: 1 Registered: Dec-04 | cadence or infinity? i was planning to get two 12" cadence svc ultra drive orange subs UD12-4H or some infinity's 12" dvc along the same price range. which subs are better going into ported boxes listening to mostly rock. also i was planning to put 2ohm load on whichever amp i decide to buy. so SVC OR DVC and cadence or infinity? |
STEVE-OH Unregistered guest | do 15in subs destort alot? if so how do i fix this without getting rid of the sub |
Bronze Member Username: Rmike21561Maryland USA Post Number: 19 Registered: May-04 | Steve, It depends on what kind of subs....what kind of amp...so on so forth. A lot of things come into play when subs don't sound the way they should. |
New member Username: MastermacjoemFarmington, New hamshire Usa Post Number: 1 Registered: Dec-04 | hey Im re- doing a system...alpine deck.. noticed a cross over what is that and why do I need it how do I hook it up? i have 2 10" orion subs and 2 amps any ideas thanx guys... |
Tel Unregistered guest | Hi, have philips car 400 radio in a omega,have followed all advise on this page but locked out in 7 safe mode,its been disconected for over a week from power but still in same 7 safe mode,when re connected. is it a dealer job or is there anything we can do to re enter code.any help would be much appreciated. Thanks. |
rick o'shea Unregistered guest | I've just installed a Philips CAR 400 into my '97 Astra. it origionally had a 300 I think. It works fine but the radio display does not work. Display works fine when radio is off with date etc......Anyone any idea on how to get the radio display working again ? Thanks |
rick o'shea Unregistered guest | I've just installed a Philips CAR 400 into my '97 Astra. it origionally had a 300 I think. It works fine but the radio display does not work. Display works fine when radio is off with date etc......Anyone any idea on how to get the radio display working again ? Thanks |
Anonymous | HI, to get out of 7 safe mode switch on ignition,press AS button,switch on radio and wait 30 - 40 mins for it to clear to ---- to enable you to enter code.Worked for me . To Rick,read someware that you need a special addapter lead to enable the display to work with radio(if we talking about multi funtion display as in omega., hope this is of help. |
Anonymous | Hi, I have a sony 10 disc changer which comes with a remote, had it for 3 years. It just stopped working so i reset it. Now the problem is it does not apear to recognise the security code - you have to use the remote to input the code. Does anyone have any suggestions. appreciate any assistance |
Unregistered guest | Hi, I have a philips car 400 and am trying to remove it from the car and replace it, but I don't know how to take it out. If anyone can help that would be fantastic. thanks |
Anonymous | Thank you so much to Pim de Vente for his incredibly clear instructions about entering the code. We were in 7 safe mode and it took about 10 minutes of holding on to the AS button before the ---- appeared. Now the radio is working as we were able to get our security code for the radio via the website www.dekodes.com. Small problem in that the date disappears on the dashboard as the radio is switched on and we are unable to get any information about what station/frequency we are on. Any ideas? |
Unregistered guest | I' m from Mexico, I have a Geo 1997, and the radio need the code that i don't know, some body know who can I have the code for the radio? |
Unregistered guest | Suzuki verona 2004. I need code to re-start stereo after re-charging battery. How do I find this code #? Richard |
Unregistered guest | hello every1 dis danielSon i got this poineer cd player for my 96 saturn it works sounds nice but a little issue the cd plays for a good 10 minutes then it starts to static and it wont play any cd but the am/fm radio works? then i have to shut off the car in order to play a cd again? what should i do what can i do ? |
Unregistered guest | I'm having the same problem as some of these other guys in that my radio (Phillips CAR400 in an M-reg Corsa) works fine but has no display. Any ideas anyone? |
Unregistered guest | Hi i have just bought a sony explod cdx m630 off ebay and the display says code in. I dont have the code as the seller is no longer responding and i dont know how to input it if i had it. Help plz |
Unregistered guest | Hi i have just bought a sony explod cdx m630 off ebay and the display says code in. I dont have the code as the seller is no longer responding and i dont know how to input it if i had it. Help plz |
Unregistered guest | Hi i have just bought a sony explod cdx m630 off ebay and the display says code in. I dont have the code as the seller is no longer responding and i dont know how to input it if i had it. Help plz |
Unregistered guest | Hi i have just bought a sony explod cdx m630 off ebay and the display says code in. I dont have the code as the seller is no longer responding and i dont know how to input it if i had it. Help plz |
Unregistered guest | I own a 2000 mitsubishi gallant. The battery was disconnected and the radio needed a code. After repeated attempts at putting in the wrong code the display shows 'off'. I now have the correct code how can I now input that code ? |
Bandit Unregistered guest | As SteveP posted: Posted on Saturday, October 02, 2004 - 11:44 am: -------------------------------------------------------------------------------- Hi, I have just aquired a phillips combined cd/radio/cassette from a renault safrane, but after putting it in mine all i get is five suares on the display (Ithink its the graphic equilizer) I have the code but don't know how to put it in? I also have the same problem (Who knows, maybe even the same stereo? :-)) Any solutions? |
v6driver Unregistered guest | The bars are your equalizer. The radio also needs an external display. That's the information display. It's fitted in the dashboard of the safrane in the upper right. |
Unregistered guest | I'm in Portugal and bought a car that was imported from Germany, a 94 Opel Omega 2.5L. The ingition switch broke and I need to replace the whole module. Since I don't speak German, the Opel sites are not an option. Anyone know where I can find an ignition module and key? Or maybe just the cylinder will do. I had to bust out two lock pins to get the key to turn so I'm not without wheels just yet. Tks in advance. |
Bronze Member Username: GoonPost Number: 28 Registered: Feb-05 | HI! does anyone know how to start there own thread?!!!?!?! to many different people asking to man different questions in the same thread...confusing! goon |
Unregistered guest | can anyone help me find how to pass amplifier cable from the bonnet through to the car of vauxhall zafira. i cant seem to see any holes to pass it through |
Unregistered guest | I HAVE A KENWOOD CAR STEREO & CASSETTE PLAYER COMBINED. I DISCONNECTED MY BATTERY FOR CHARGING. IT NOW WANTS AN INPUT CODE. HAS ANYONE GOT THE CODE PLEASE? THE MODEL IS: KENWOOD AX-498AR AND SERIAL IS: KE 0406L0200134 - CAN ANYONE GET ME THE SECURITY CODE PLEASE? THIS IS AN AUSTRALIAN MODEL IN A HONDA CIVIC GLi. email is jim@austlist.com |
annoyance Unregistered guest | hi i have a daewoo lanos with a philips car stereo and i have lost the code. how can i get the code? the model of the radio is 79RC600/95 can neone help me? |
Unregistered guest | I have Philips CAR400, and I needed a code,Thanks |
Unregistered guest | I have philips car 400 and I need removable panel for it.Does anyone know where to ask for it Thanks |
New member Username: OrlandoPost Number: 1 Registered: Mar-05 | Hi guys pls help me to get in function my cassette car player grundig which is originally fixed in my opel vectra 1994 model. after my battery dis-charge the cassette player doesn't work anymore. I dont have the code key and dont know how to use decoding. pls help to rectify the problem of my car stereo cassette...Tnx a million |
Unregistered guest | Hi,does anyone know how to enter the code on phillips standard radio in renault scenic 1998 as manual has been lost.... |
Unregistered guest | Hi All! Does anyone have a users manual for renault safrane exec 5 door 1999 january make. Many thanks |
Unregistered guest | Hi All! Does anyone have a users manual for renault safrane exec 5 door 1999 january make. Many thanks |
Sue W Unregistered guest | I note with interest the comments on how to enter a code if radio has only 6 number options. The correct entry of the security code is while keeping the > (that is right arrow key) pressed, switch on the set with the VOL key. Keep the right arrow key pressed until you hear a beep. The Security Code is now active. Entering the Code - Action - Switch on the set, Press the preset 1 key. Enter the first figure of the code with the <> arrow keys. Press the preset 1 key again. Enter the second figure with the <> arrow keys. Continue this until all digits are entered and press the preset 1 key once more. If the correct code was entered the set gives a beep and will then function normally. If an incorrect code was entered a waiting period commences. DO NOT TURN OFF THE RADIO. Start all over again when COdE reappears. |
Unregistered guest | hello everybody y have a Philips car 400 casette radio, so y want to buy a new cd changer, y want to know how to fix it to philips car 400 |
New member Username: ChasfmillMauriceville, TX USA Post Number: 3 Registered: Mar-05 | Help, please. I have the same problem as many on the list. I have just bought a 2001 Mitsubishi Mirage. We pulled the radio fuse when doing some work. Now we can't use the radio or cd player without a code. We don't have an owner's manual, so we don't have the code, nor do we know how to enter the code. Can anyone help? |
New member Username: BudmanPost Number: 1 Registered: Mar-05 | I have a 2000 Montero sport I replaced my power antenna now the radio says code when I turn the ignition on I can enter the code and it works till I turn the ignition off then it reads code again, any help please |
Pronto Unregistered guest | To anyone who wants to know how to install the code for Philips Car400 radio - please do the following actions : Car 400 Switch On Ignition (No Need To Start Engine) Press & Hold Preset " AS " and Switch Radio On - Display Shows " SAFE " And Then Shows " 10 - - - - " Press preset " 1 " repeatedly for 1st Digit Press preset " 2 " repeatedly for 2nd Digit Press preset " 3 " repeatedly for 3rd Digit Press preset " 4 " repeatedly for 4th Digit If the correct code number is now shown Press & Hold Preset " AS " Until the Unit Beeps |
Unregistered guest | does anyone know how to enter the code for the CD player on a 1999 Mitsubishi Eclipse I know the code is on the back of the CD player i just don't know how to enter it. Thanks Gab |
goisor Unregistered guest | HI, is there any free site that will provide the CODE for a Philips Car400 radio? |
Anonymous | i have a golf want 2 get the best possible setup for 2 12" audio pipe subs and best box specifications |
Davidcross Unregistered guest | KENWOOD CODE I have the codes for all the kenwoods models, except DVD's ones. It'll cost 15 $, if you want to decode your radio cd receiver YOU MUST HAVE A KENWOOD REMOTE CONTROL WITH NUMERIC OR ALPHABETIC BUTTONS NO EXCEPTIONS! send me an e-mail david_pinky@hotmail.com You will pay by PayPal |
Anonymous | Hi, Can anyone help me please. I had to change the battery on my ford mondeo R reg and my stereo asked for the code it wasn't it code i thought but i had put this code in 10 times and now all it says is LOCKED, help please its a ford stereo model number 5000RDS. |
loredana Unregistered guest | I have a philips car 400 GM 90506173 PA6 GF15,I change battery of my car but I have lost code of radio so I can't my radio to work becouse I don't remember code. If something I can do to reset code and make radio to work without safety or some free site that provide code for it? Please help me!! |
gian52 Unregistered guest | car 400 leggo : 7safe come faccio a resettare grazie infinite |
gian52 Unregistered guest | per Salvatore (italy)mi trovo con la scritta 7safe e non riesco ad inserire il codice come fare?...come resettare l'autoradio car400 scusa ma non conosco l'inglese... giro la domanda a questo forum...aiuto!! |
gian52 Unregistered guest | A tutti i possesori di philips car 400 bloccate con la dicitura: 7 SAFE la procedura corretta e' questa: lasciare car 400 accesa con il blocco visualizzato,si puo' circolare tranquillamente,dopo un lasso di tempo che varia da 5minuti a 30minuti si resetta da sola e si presenta pronta per ricevere il codice, attenzione nell'iserimento deve risultare il n°reale del car 400 premere il tasto fino a quando si legge il numero sul display se si sbaglia spegnere non salvare ripetere l'operazione a procedura corretta salvare con il tasto AS da tenere premuto fino al segnale sonoro buona fortuna a tutti GIAN52 |
strtracer Unregistered guest | Hey I Installed my deck but i dont know the cd code.. i tryed what i thought it was and that didnt work soo mayb i was thinking theres a default code? any ideas? its a Kenwood - 419 deck Thanx |
TazzyK Unregistered guest | If it just says SAFE and no number (CAR400) is the unit buggered or is there a way around this. According to the manual, SAFE appears after a powercut, but I've tried the ignition, AS and on, but don't get a bleep |
New member Username: BldintxPost Number: 1 Registered: May-05 | I am trying to setup a audo system in my car. I want to buy 2 300 watt subs, 2 4" speakers, and 2 6" x 9" speakers the 4" say "It features 20 watts of power for a smooth, clean range and handles 100 watts of maximum power" and the 6" ones say "featuring 40 watts of power with a capacity for 240 watts of maximum power" How big of an amp should I get and do I need to get smaller subs. |
Unregistered guest | hi can anyone help me with how to enter the code on a chrysler voyger cassete player ? i have the code wich i entered after the battery went flat by punching it in with the numbers . it then said wait 2 hrs 2 days ago can anyone tell me what i have done wrong |
Unregistered guest | PLEASE hELP HOW TO RESET MY CAR STEREO IN A fORD mONDEO? ITS A FORD AUDIO SYSTEM THANKS EDA |