Jl Audio Question

 

ooooookkkkk
Unregistered guest
I jus bought a jl 1000/1 amp and i installed it n when i turned it on the low v came on and it wont work what should i do??
o n the subs im running are 2 12" diamond audio d9's
 

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 5516
Registered: Jul-05
not sure but i'm thinking a 12" D9 is 800wrms & 2 of those might be overloading ur amp

try connecting only 1 sub 2 that amp & see what happens .....
 

Gold Member
Username: Tjmutlow

Post Number: 1466
Registered: Sep-05
check voltage at amp and maybe jump wire from power to amp turn on...to see if that fixes the problem
 

Silver Member
Username: Spyder

Eglin AFB, Florida USA

Post Number: 290
Registered: Jun-05
only reason that amp should be showing low volage is if it can't get the right amount of current from the charging system.....if it is below 11 volts it will not turn on......was the car on when you tried it?

also make sure you ground is solid.
 

ooooookkkkk
Unregistered guest
no the key was jus turned back so that the radio would come on

should i get a cap would that help
 

Silver Member
Username: Goatin

U.S.A

Post Number: 292
Registered: Jan-06
Dont get a cap until you figure out your problem.

Amps work better with car on.
 

Gold Member
Username: Tjmutlow

Post Number: 1473
Registered: Sep-05
test voltage at the amp
 

ooooookkkkk
Unregistered guest
i turned it on and the light came on again how do i test the voltage at the amp??
 

Gold Member
Username: Tjmutlow

Post Number: 1485
Registered: Sep-05
with a multi meter.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us