Like

How many cvr's can kx1200.1 push

 

Bronze Member
Username: Night_mirage

AmmanJordan

Post Number: 100
Registered: Jan-06
i bought yasterday kx1200.1
and two of cvr's 12" dvc 4ohm

i would like to buy another one can kx1200.1 push three of them >

thanks

 

Silver Member
Username: Pelona

Post Number: 531
Registered: Dec-05
yes but it can also be used for two cvrs
 

Silver Member
Username: Night_mirage

AmmanJordan

Post Number: 101
Registered: Jan-06
okay but does kx1200 will do the same worke on three or less

 

Silver Member
Username: Pelona

Post Number: 532
Registered: Dec-05
i dont know about that. but i would stay with 2 cvrs so you can get them at full excursion and itll be easier to install.

and i think the ohms wont be right if you use 3 cvrs.
 

Silver Member
Username: Night_mirage

AmmanJordan

Post Number: 102
Registered: Jan-06
thanks Pelon

i also think so .

cause cvr is 400 RMS and kx1200 push @4ohm 300 w

 

Platinum Member
Username: Glasswolf

Wisteria, Lane USA

Post Number: 11062
Registered: Dec-03
ideally you'd run four dual 2-ohm coil CVRs on that amp.
get 300 watts each at 1 ohm.
 

Silver Member
Username: Pelona

Post Number: 535
Registered: Dec-05
i dont know. all that ohms sh!t confuses me.
 

Silver Member
Username: Night_mirage

AmmanJordan

Post Number: 105
Registered: Jan-06
GlassWolf i did'nt understand you

would you give me more details .
 

Gold Member
Username: Tjmutlow

Post Number: 1462
Registered: Sep-05
take 4 of the comp vrs dual 2ohms and wire them series/parallel see www.the12volt.com under woofer wiring for the diagram.
 

New member
Username: Thunderforce

Netherlands

Post Number: 4
Registered: Feb-06
If you use 4 DVC 4ohm Cvrs youre KX1200.1 wil go up in smoke, it will see a 0,5ohm load with 4 or a 0,667ohm load with 3 subs.

KX1200.1 smells very bad
 

Silver Member
Username: Night_mirage

AmmanJordan

Post Number: 110
Registered: Jan-06
okay what about

SX1250.1

can i wire three 4ohm on it
 

Platinum Member
Username: Glasswolf

Wisteria, Lane USA

Post Number: 11093
Registered: Dec-03
in straight parallel, three dual 4 ohm coil subs would be a .666 ohm load.
the amp would shut down and go into protection mode.
 

Gold Member
Username: Tjmutlow

Post Number: 1470
Registered: Sep-05
you can run 4 dual4 to a 2ohm load. and then run a zx series amp like the 1500.1
 

Gold Member
Username: Bestmankind

Los Angeles, CA USA

Post Number: 2396
Registered: Oct-05
"in straight parallel, three dual 4 ohm coil subs would be a .666 ohm load.
the amp would shut down and go into protection mode. "

that whole statement just sounds freaky.
 

Gold Member
Username: B101

Queen City, NC USA

Post Number: 1081
Registered: Sep-05
lol.
Chad .666 isnt too bad; but will probrably fry the hell out of that kicker amp. He would have to use better equipment. Isnt that thing 2ohm stable?
 

Silver Member
Username: Night_mirage

AmmanJordan

Post Number: 117
Registered: Jan-06
no its 1 ohm

i will put just two 12" cvr 2ohm

is that okay
 

New member
Username: Thunderforce

Netherlands

Post Number: 6
Registered: Feb-06
if you want to play at 0.667 you could better take a modified MTX 1501D.

if you link 2 of them at 16volt they give over 6000W of power
 

Silver Member
Username: Night_mirage

AmmanJordan

Post Number: 119
Registered: Jan-06
Thamks Thunder

but i just want kicker ..

 

Anonymous
 
if you put 2 dual 2 ohm subs you will get 2ohm or a .5ohm load depending on how you wire it or if you put 2 dual 4 ohm subs you will get 1ohm or a 4ohm load depending on how you wire it!
 

Silver Member
Username: Night_mirage

AmmanJordan

Post Number: 120
Registered: Jan-06
anonymous

i will put 2 cvr dual 4ohm on sx1250.1 amp
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us