Silver Member Username: GoatinU.S.A Post Number: 244 Registered: Jan-06 | I am getting 4 used 4ohm dual voice coil they were all hooked up in 2 ohm a impedance on the amp but the amp was putting out the power at 4 ohms will the subs be ok?? |
Silver Member Username: LbecknerTulsa, Ok Usa Post Number: 610 Registered: Oct-04 | 4 dual 4 ohms should be wired down to 2 ohms. is that what the amp is capable of? |
Silver Member Username: GoatinU.S.A Post Number: 246 Registered: Jan-06 | his amp does 1000watt at 4ohm but speakers are setup for 2 ohm |
Silver Member Username: GoatinU.S.A Post Number: 249 Registered: Jan-06 | |
Silver Member Username: Safe_crackerChicago, IL US Post Number: 147 Registered: Jan-06 | What amp is it? |
Silver Member Username: AlteraudiousaConcord Post Number: 212 Registered: Jan-06 | here you go.... http://www.edesignaudio.com/wiring.php you will need to see what the amp is capable of handling the ohm load as that is more important than how to wire it. Do you know its a two channel or mono amp? |