Wired correctly?

 

Silver Member
Username: Sony224422

Deep River, CT US

Post Number: 307
Registered: Dec-04
[IMG]http://i11.photobucket.com/albums/a200/sony224422/untitled.jpg[/IMG]

is this how i want my subs wired for a 1 ohm load?
 

Silver Member
Username: Rob_brown

Post Number: 240
Registered: Jul-04
I think that would be a 1.5 ohm load. Try www.edesignaudio.com and go to the tutorials part. they should have it.
 

Silver Member
Username: Blainew

Post Number: 872
Registered: Nov-05
if they are dual 4 ohms each here is how you wire...

Upload
 

Silver Member
Username: Blainew

Post Number: 873
Registered: Nov-05
if they are dual 4 ohms each here is how you wire...

Upload
 

New member
Username: Mph

Post Number: 2
Registered: Feb-06
I forgot to add to the above post. In regard to the 1 ohm mono approach. That is assuming your subs are dual 4 ohm coils.

I could help you more if I knew the number and impedence of the coils.
 

Silver Member
Username: Rob_brown

Post Number: 241
Registered: Jul-04
they're dual 6, if i read that drawing correctly.. it was really small.
 

Gold Member
Username: James1115

Ct

Post Number: 4934
Registered: Dec-04
yeah I think it said dual 6 although it was hard to see.

whats up Robbie long time no see man!
 

Silver Member
Username: Sony224422

Deep River, CT US

Post Number: 311
Registered: Dec-04
image/bmpUpload
subs.bmp (91.8 k)
 

Silver Member
Username: Sony224422

Deep River, CT US

Post Number: 312
Registered: Dec-04
This is a 1 ohm load right? I'm only curious because the box that was made for them has 2 terminals on the box.. one for each sub. and the amp has 2 + and 2 -. i know its a mono amp, im just curious if it just changes the load. I have wired pos to pos, neg to neg (on sub) then to 1 terminal on the box, and then from the box to one of the + and -. Same thing for the other side. So the subs are never actually connected to eachother if you know what i mean. But since its a mono amp isn't it still a 1 ohm load?
 

Gold Member
Username: James1115

Ct

Post Number: 4958
Registered: Dec-04
yup thats a 1 ohm load
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us