R.c leads to amps

 

New member
Username: Nezo01

Peterborough, England Cambridgeshire

Post Number: 1
Registered: Feb-06
hi can you help ive got 2,4channel amps and 4,2 channel amps but not no how to wire up the r.c leads do i daisy-chain the leads to each amps or do i get r.c splites, please help!!!!!!thanks
 

Gold Member
Username: Tjmutlow

Post Number: 1336
Registered: Sep-05
if your talking about the remote wire, your prob going to need to run multiple lines. would not run more then 2-3 amps per wire.
 

New member
Username: Nezo01

Peterborough, England Cambridgeshire

Post Number: 2
Registered: Feb-06
what i mean is the rca leads that you use to wire up the amp not remote lead. how do i connect up 6 amps when i only have 2 rca leads that come from the head unit.
do i go into the input with the rca lead then come out of the output into the input on the other amp and so on
 

Gold Member
Username: Tjmutlow

Post Number: 1345
Registered: Sep-05
your ampss either need rca line outs on them, or your going to have to use y's,
 

New member
Username: Nezo01

Peterborough, England Cambridgeshire

Post Number: 3
Registered: Feb-06
if i use y`s will it still sound the same as i will need to use alot of them.
 

Gold Member
Username: Tjmutlow

Post Number: 1351
Registered: Sep-05
no it will not sound the same, why use so many amps. what your doing is basically splitting the signal.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us