Single voice wiring

 

New member
Username: Army12bc

Indiana, Pa

Post Number: 1
Registered: Feb-06
i have an audiobahn a4125hct amp with 2 jl audio 12w7's i want to wire into a 1 or 2 ohm load. how do i do this with a 4 channel amp. diagram link would help.
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 399
Registered: Oct-05
go to www.the12volt.com
 

Gold Member
Username: Tjmutlow

Post Number: 1328
Registered: Sep-05
you need to run those subs bridged, they are 3ohm speakers, so 1 sub per pair of channels between 250-500w or run positive to positive and neg to neg for a 1.5ohm load, between 500-1000 for pair of subs, and only on 1 pair of channels.
 

New member
Username: Army12bc

Indiana, Pa

Post Number: 2
Registered: Feb-06
pos to pos and neg to neg how?
 

New member
Username: Army12bc

Indiana, Pa

Post Number: 3
Registered: Feb-06
how should i set the amp settings as well the subsonic feature and all that has me baffled
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us