|
Silver Member Username: MixmastaspigCanada, Canada Canada Post Number: 351 Registered: Sep-05 | OK I got all confused about wiring subs, I plan to run my subs either bridged @ 2 ohms for 1950 watts rms....or seperate @ 1 ohm for 1000 rms each. I need two DUAL 2 ohm VC subs right? (runninng 2 12" subs) *posted in amp area as well...it's a just dead place over there |
|
Bronze Member Username: AlteraudiousaConcord Post Number: 100 Registered: Jan-06 | well ok to run two subs at a 2ohm load you'll need DVC2ohm subs. Each sub will be wired in series and then parallel at the amp for a 2ohm load. For a 1ohm load you'll need DVC4ohm subs. You wire each sub parallel and then wire it parallel at the amp. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 5199 Registered: Jul-05 | it gets easy when u use this http://www.the12volt.com/caraudio/woofer_configurations.asp |
|
Silver Member Username: MixmastaspigCanada, Canada Canada Post Number: 352 Registered: Sep-05 | Sweet thanks alot... does anythign change since my amp is a Class D dual mono block amp? Dark Blue 1000.2 as each amp can have seperate channel...or should I use just one channel? |
|
Silver Member Username: MixmastaspigCanada, Canada Canada Post Number: 353 Registered: Sep-05 | ok so ONLY dual 4 ohm subs (2 of em) can be wired to run @ 1 ohm?...I dont want them bridged as my amp can only do down to 2 ohm bridged....I wish to have each rub running @ 1 ohm off a seperate channel as its a 2 channel class D amp, so 1000 rms per sub @ 1 ohm! |
|
Gold Member Username: TjmutlowPost Number: 1319 Registered: Sep-05 | im confused, 1000.2 normally means 2 channel doesnt it ant least the .2 part. |
|
Silver Member Username: MixmastaspigCanada, Canada Canada Post Number: 354 Registered: Sep-05 | Yeah the 1000.2 is 2 channel and I want to run my subs in 2 channel mode @ 1 ohm each...so they will be getting 1000 watts rms.......how do I wire them? |
|
Gold Member Username: TjmutlowPost Number: 1332 Registered: Sep-05 | never heard of amp, but most 2 channels are only stable down to 2ohms stereo..... |