Mixing diffrent sub models together


The 1
Unregistered guest
i have a 12 stroker dual 2 ohm which is 4000 watts,and a 2400 watt 15" stroker dual 2 ohm which is a older model. can i mix these two together and form a 2 ohm load ok without any probs?

Silver Member
Username: Pelona

Post Number: 123
Registered: Dec-05
dont do it.

different size subs will play the same frequency differently. so it will sound like sh!t. And the 15" will probably overpower the 12 so you wont be able to hear it.

Gold Member
Username: Rovin

Trinidad & T...

Post Number: 5009
Registered: Jul-05

Silver Member
Username: Fandim

Reno, Nevada United State...

Post Number: 616
Registered: Jun-05
Heh... should never ever ever mix different subs on the same channel.. But yes, you could end up with hte 2 ohm load you wanted.. each would get equal power, but it wouldnt sound well at all.

The 1
Unregistered guest
i noticed on my 12" stroker,the box is tuned to 36hz and subsonic filter is on 20 hz, on the low bass notes, it's like their filtered out. but on high bass notes their not, any suggestions?
« Previous Thread | Next Thread »


Shop Related Deals


Main Forums

Today's Posts

Forum Help

Follow Us