JL Audio

 

New member
Username: Lowemotions

Post Number: 1
Registered: Jan-06
I have a 12w7 and a 1000/1 JL amp. in a 95 Escort and the last time I went to a comp. I hit 162.9. I have 2 optimum jell batts. and a 1 farad cap. How can I get more out of my system.
 

Silver Member
Username: Pelona

Post Number: 104
Registered: Dec-05
you did not hit 162.9 you liar.
 

Gold Member
Username: 54danny54

Betsy layne, Kentucky..GO... USA duh

Post Number: 1535
Registered: Nov-04
first of all i doubt u hit 162.9 dB with a single 12W7
but to get more out of it...go ported if u havent already, screw around with box placment
mess around with the tuning a little bit
 

New member
Username: Lowemotions

Post Number: 2
Registered: Jan-06
my fault I hit 142.9.. i hit the wrong # sorry
 

New member
Username: Lowemotions

Post Number: 3
Registered: Jan-06
And the W7 is in the ported JL box they made for that sub
 

Gold Member
Username: Jonathan_f

GA USA

Post Number: 5451
Registered: May-04
142.9 from a single 12" sub is very respectable, especially if it's a SQL application and on the new termlab. Not a lot more you can do while retaining musicality, aside from adding another sub and amp.
 

New member
Username: Lowemotions

Post Number: 6
Registered: Jan-06
What do you think about the JL 13W7... what would that do for me?
 

Gold Member
Username: Jonathan_f

GA USA

Post Number: 5454
Registered: May-04
Replacing your 12W7 with a 13W7 will get a little louder, but not the gain you would get from adding another 12W7.
 

Silver Member
Username: Fandim

Reno, Nevada United State...

Post Number: 587
Registered: Jun-05
also, there is no prefab HO boxes for the 13w7 like your 12w7, so unless you're very good at box building, you'd actually lose a little bit.
 

New member
Username: Lowemotions

Post Number: 7
Registered: Jan-06
would my 1000/1 run 2 12w7's
 

Silver Member
Username: Fandim

Reno, Nevada United State...

Post Number: 590
Registered: Jun-05
nearly perfect, Joe.
 

Silver Member
Username: Solacedagony

New Jersey US

Post Number: 749
Registered: Oct-04
If you're running your 12W7 w/ a 1000/1 now, why not get another 12W7 powered by another 1000/1?
 

Gold Member
Username: Tjmutlow

Post Number: 1038
Registered: Sep-05
the JL is not an spl sub morre of a sql sub, and that comes from the mouth of the JL rep.
 

Gold Member
Username: James1115

Wilton, Ct

Post Number: 4561
Registered: Dec-04
if you could add 1 more sub it wouldnt make that much of a difference if any. You are currently running 1-12 with 1000 watts, now if you add a second and give them 500 each you will be losing 3db's for cutting the power in half but adding 3db's for surface area of another sub. 142.9 is very loud for a everyday application:-) if you want to go strict SPL thats one thing you can get much higher but if you want it to maintain decent SQ then you arnt going to get much higher unless you plan on dropping a good amount of money which you might be prepared to do I have no idea. NICE score man especially if it was legally judged on the new term lab:-)
 

New member
Username: Lowemotions

Post Number: 8
Registered: Jan-06
thanks all, i will inform you on what i decide to do and let you know how it turns out. thanks again for the input
 

Gold Member
Username: Jonathan_f

GA USA

Post Number: 5469
Registered: May-04
"f you could add 1 more sub it wouldnt make that much of a difference if any. You are currently running 1-12 with 1000 watts, now if you add a second and give them 500 each you will be losing 3db's for cutting the power in half but adding 3db's for surface area of another sub."

It's considered that doubling total power (not power to each individual driver) is what provides a 3db increase. Maintaining the same total power will keep you at that level, with the 3db benefit of added cone area. So it'd be a 3db gain.
 

Gold Member
Username: James1115

Wilton, Ct

Post Number: 4593
Registered: Dec-04
either way not worth $500
 

Silver Member
Username: Ucfsaxman

Oviedo/orlando, Fl

Post Number: 539
Registered: May-05
i always thinks it's funny when the W7 comes up and people say its a SQL sub. but bottom line those damn things get loud. maybe not for hardcore spl people and compared to these underground internet spl subs like RE and AA and whatever but for all tense and purposes the W7 is a loud sub.
 

Gold Member
Username: Jonathan_f

GA USA

Post Number: 5479
Registered: May-04
W7 will hang with an XXX and Avalanche, though the 15" XXX and Ava will slightly surpass the 13W7. But, W7 sounds better IMO.
 

Gold Member
Username: Carguy

Post Number: 5221
Registered: Nov-04
I 2nd that. I've bashed JL in the past, but after I got one and tested it, I was impressed.
If you really want to compete with 15" XXX, then ask JL to build you a custom HO box for 13W7.
You'll need a large van though.
 

New member
Username: Dumbbass

Post Number: 1
Registered: Jan-06
I have a 12w7 and i plan on putting in a civic si 04 Hatchback...is a jl audio amp 500/1 good enough? or should i go all out and get the jl 1000/1?Or go with a amp that puts out 600 watt RMS? please help me out there jl audio professionals?
 

New member
Username: 04yellowgto

Tuscaloosa, Alabama

Post Number: 3
Registered: Jan-06
What do people think of Digital Designs? I had a 3515, built my own box to specs and powered it by a hifonics 1500d. It was the loudest I'd ever heard, but then again, I've never been to any competitions. Any inputs?
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 4687
Registered: Jul-05
I like DD subs

quick guide

http://pub14.ezboard.com/fcaraudiotalkfrm27.showMessage?topicID=27.topic
 

Gold Member
Username: Project6

Post Number: 4911
Registered: Dec-03
Nice
 

Bob365
Unregistered guest
Others might disagree, but I'd just with the 1000/1. Otherwise, look for an amp that's stable at 1.5 ohms. Most other amps will only show ratings at 1, 2, and 4 whether or not they're stable at something odd like 1.5
 

Gold Member
Username: Chaunb3400

Huntsville, Alabama U.S.

Post Number: 4690
Registered: Jul-05
Bob u post a lot of nice stuff why not register
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us