I was seriously debating going with a IDmax 12 in my new system in my truck over the ava 12 I was planning on running. I am going to be removing the center seat up front and building an enclosure with a 12 downfiring and ported firing toward the dash. I can get about 2-2.5cu ft. what do you think I should do size wise and tuned to? I am going to be running it either with my orion hcca 250g4 @ 1ohm 800 watts or my ppi a600 at 4ohms with 600. what do you think?
hey guys thanks so much I did some final measuring, and I am going to go 2.0 tuned to 28. Thanks for the detail mix form that program what size port do I need at 2.0 tuned to 28? after displacement.
VB=2 CF (red).....= BOX SIZE FB=24.19 Hz.......= PORT TUNING FREQUENCY QL=6.591..........= BOX LEAKEAGE LOSSES F3=30.82 Hz.......= FREQUENCY CUTOFF 3DB BELOW PAR DV=3".............= PORT DIAMETER LV=13.93".........= PORT LENGTH
2.0 cubic feet is the net volume. You must add for the port and driver displacement.
3" X 13.93" port displaces the volume by .0669 cubic feet. The driver displaces the volume by .12 cubic feet. So make the box 2.1869 cubic feet or 61.93 liters.
