JL 500/1 for Compvr10's?

 

Silver Member
Username: Killer44

Ontario Canada

Post Number: 305
Registered: Dec-04
will a Jl audio 500/1 mono amp work good for two kicker comp vr 10's? i was gunna use a PG OCTANE 8.0:1 (600rms) brand new, but the JL is used...is it good to power the comp vrs?
 

Silver Member
Username: Killer44

Ontario Canada

Post Number: 306
Registered: Dec-04
ne one?
 

Silver Member
Username: Dustin3

Tigard, Or U.S.

Post Number: 183
Registered: Oct-05
yea it would but why get somethin so expensive for that much power?
 

Silver Member
Username: Greeney

Grove, MN US

Post Number: 212
Registered: Dec-05
if your looking cheap with a lot of power- try Hifonics amps ( they say the put out about 80% of what they so when choosing it if u want - have that in mind)
 

Silver Member
Username: Tjmutlow

Post Number: 721
Registered: Sep-05
if you can get it reasonable, then go ahead...
 

Silver Member
Username: Killer44

Ontario Canada

Post Number: 307
Registered: Dec-04
what would be a reasonable price to get it for, he is selling a Jl 300/4 amp Jl 500/1 amp, 4 quest type R 10" subs in a box, SonY CD,XM Radio all for $1000 canadian(prob like 800-900 us) and he says he is willing to sell seperately....
 

Silver Member
Username: Tjmutlow

Post Number: 729
Registered: Sep-05
if you can get it for at least 250 idf not cheaper
 

Silver Member
Username: Killer44

Ontario Canada

Post Number: 308
Registered: Dec-04
idf?
 

Silver Member
Username: Killer44

Ontario Canada

Post Number: 309
Registered: Dec-04
ok i went and looked @ a Hifonics TX1005D the amp is rated @ 1000 watts RMS @ 1 ohm ,700 watts RMS @ 2 ohms but i know hifonics usually put out 80% of their rated power so i would be fine running the amp @ 2ohms (about 500rms) but would the compvr's be able to hanlde the 700-800rms that the amp would actually put out @ 1ohm? they are 300rms each (the comp vrs)so they would both be overpowered by aprox. 50-100watts....
 

Silver Member
Username: Cenus

Hicksville, Ohio Usa

Post Number: 923
Registered: Jan-05
ya they should be fine, i've seen cvr's take 600watts and not have a problem.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us