I need help with me amp

 

New member
Username: Timsta

Cessnock, NSW Australia

Post Number: 1
Registered: Nov-05
i have 2 amps one is 350 watts the other is 300 i have a 600 watt 4 ohms clarion sub now i dont have enough power from my 350 so is there a way to bridge my amps together but my amps only will do 4 ohms i think so is there a way i can do it so i keep it at 4 ohms if not i still would like to know how to do it at 3 or 2 ohms prefer 4 though
 

Silver Member
Username: Bestmankind

Los Angeles, CA USA

Post Number: 953
Registered: Oct-05
if that sub is a dvc sub then you can only make it 2 or 8 ohms
 

New member
Username: Nikes29

PALMDALE, CA LA

Post Number: 2
Registered: Nov-05
I HAVE A 1200 KENWOOD MONO AMP AND A MACINTOCH 600 WATT 4CH AMP AND A 1200 WATT CAP. EVERY ONCE IN A WHILE MY FUSE BLOWS 80AMP WHEN I TURN IT UP VERY LOUD.
 

Anonymous
 
yeah , so !? .....
 

Silver Member
Username: Bestmankind

Los Angeles, CA USA

Post Number: 968
Registered: Oct-05
get a bigger fuse.
 

New member
Username: Timsta

Cessnock, NSW Australia

Post Number: 2
Registered: Nov-05
I dont know wat a dvc sub is but it says single 4 ohm heat resistant voice coil its a clarion pro audio sub srw1243 so its 4 ohms so must not b a dvc sub i also tried to hook it up a few different ways but all i get is a continuos fast popping and back though the head deck and out the front speakers
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us