|
New member Username: Reaper702Post Number: 5 Registered: Nov-05 | i got a kicker sx400.2 and i am going to be bridging the amp so i can get 400x1 @ 4ohms and i was wondering since the amp is a two channel, would i buy a 2 channel amp kit or a normal amp kit? thanks in advance. |
|
Gold Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 1729 Registered: Jul-05 | normal kit will be fine http://www.knukonceptz.com/ |
|
New member Username: Reaper702Post Number: 7 Registered: Nov-05 | i c but would i still be able to use a 2ch install kit if i do bridge the channels? |
|
Gold Member Username: RovinTrinidad & T... Post Number: 2727 Registered: Jul-05 | i could be wrong - but i don't think there is such a thing as 1/2/4 channel kits . U get a kit based on amp's true rmw power & distance that it is going to be installed in your ride which will determine the gauge of wires to be use . use this power/cable guide http://www.the12volt.com/info/recwirsz.asp ....... |
|
New member Username: Reaper702Post Number: 8 Registered: Nov-05 | http://sonicelectronix.com/item_3938.html http://sonicelectronix.com/item_3939.html yes well atleast kicker sells them, and i have a 2ch 4 guage and since i was going to bridge the amp i was curious if i could still use the kit. |
|
Gold Member Username: RovinTrinidad & T... Post Number: 2748 Registered: Jul-05 | ok - well as u can figure the power wires are the same ,they just provide extra lenghts of speaker wire to use on either a 2 or 4 chan amp http://www.wickedcases.com/caraudio/wire.html btw -those kits u showed me are Expensive , u can get kits for like $40/50 ..... |