1 DVC driver with Voice Coils in Series Connecting the two voice coils of the driver in series (+ to -) will result in the following impedances: Dual-6 Ohm Subwoofer: 12 Ohms Dual-4 Ohm Subwoofer: 8 Ohms Dual-2 Ohm Subwoofer: 4 Ohms Dual-1.5 Ohm Subwoofer: 3 Ohms
They are 2 DVC 2 ohm speakers. The amp is stable at like 125X2 @2 ohms and 85X2 @4 ohms. I want to run it at 4 ohms. I am unsure of how to wire it since it is a 2 channel amp. If I wire them in series like it says above will it give a 4 ohm load or 2 ohm load on the internet? I understand how it works with a mono amp but am unsure about a 2 channel.
Connect one speaker in serie (as u said above)to 1 channel of the amp and the same for the other speaker (always the 2 voice coils in serie) to the other channel of the amp. U'll push those 2 speakers with 85 watts each at 4 ohm.