Inphase 2400 problems

 

New member
Username: Schooleydoo

Post Number: 1
Registered: Sep-05
Hi guys, had a search through the threads and cant find anything similar.

As of last night i have a 2400 4 channel inphase amp, with a jl 800 10" sub. (used but i trust the guy).

Problem is it wont run, all wires in correctly, but no power light (fuses are fine). if i take the gnd wire out of the amp, i get a power light but it still doesnt run. Plug it back in and i lose the power light.

Anyone ever come across anything like this?

Suggestions much appreicated :o)
 

New member
Username: Schooleydoo

Post Number: 2
Registered: Sep-05
think it must be earthing on the RCA as when disconnected the power disappears. RCA is fine and not touching the bodywork at all. Earth its fine, checked it on a door hinge.

SO where else could it be earthing out?
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us