|
New member Username: NathannepplPost Number: 1 Registered: Sep-05 | I HAVE 2 12" KENWOODS AND 1 800 WATT AMP RUNING THEM SHOULD I ADD ANOTHER 800 WATT KENWOOD AMP AND CAN YOU PUT ANYTHING IN A BOX TO MAKE IT HIT HARDER |
|
Platinum Member Username: GlasswolfWisteria, Lane USA Post Number: 10152 Registered: Dec-03 | please lose the caps lock. |
|
Silver Member Username: A3formePost Number: 398 Registered: Sep-04 | Nathan - what model subs and what model amp. what kind of enclosue/box are the subs in. Ultimately, I wouldn't suggest you buy anything more Kenwood unless it's a HU, but lets see what you've got first. |
|
New member Username: NathannepplPost Number: 2 Registered: Sep-05 | the sub model is a kfcw3309 and the amp model is kac 7201 |
|
Platinum Member Username: GlasswolfWisteria, Lane USA Post Number: 10159 Registered: Dec-03 | if you're happy with the kenwood stuff, get the second amp. personally I wouldn't buy anything kenwood. |
|
New member Username: NathannepplPost Number: 3 Registered: Sep-05 | just asking what is wrong with kenwood |
|
Silver Member Username: A3formePost Number: 399 Registered: Sep-04 | Amp Specs: 150 watts RMS x 2 at 4 ohms 230 watts x 2 at 2 ohms 460 watts RMS x 1 bridged output at 4 ohms Sub Specs: Single 4ohm 400W RMS 8mm Xmax 1 cu ft sealed/1.5 cu ft. ported IMO another of the same amp would work wonders. You are underpowering your subs significantly with the current setup. You could run 1 amp per sub if you run the amps bridged and you would get better output. |
|
Platinum Member Username: GlasswolfWisteria, Lane USA Post Number: 10171 Registered: Dec-03 | reliability is the main problem. |
|
Gold Member Username: JmloughreyFarmington, CT Post Number: 1380 Registered: Jul-04 | i've got a KAC7201 sitting in my closet, needs a couple new fuses and it'll be good to go, give ya a super deal... email me, JMLoughrey@aol.com |