Bronze Member Username: Biggyg9712
Post Number: 21
Registered: Sep-05
|
Posted on im thinking of buying an eclipse 12'' aluminum subwoofer and it runs 450 watts rms and 900 watts peak. what amp should i get to power this? |
Silver Member Username: Matt12490
Benicia,
California
Post Number: 194
Registered: May-05
|
Posted on What are the voice coil configurations? |
Bronze Member Username: Biggyg9712
Post Number: 23
Registered: Sep-05
|
Posted on i think 4 ohm dvc |
Bronze Member Username: Biggyg9712
Post Number: 24
Registered: Sep-05
|
Posted on nvm sorry..its not dvc 4 ohm its dvc 2 ohm |
Bronze Member Username: Biggyg9712
Post Number: 26
Registered: Sep-05
|
Posted on bump |
Silver Member Username: A3forme
Post Number: 392
Registered: Sep-04
|
Posted on These subs are typically under-rated. For the 2ohm DVC you can go with an amp that puts out 500-600w RMS at 1 or 4 ohms.
Maybe a PG Xenon 600.1 or JL 500/1, these will both opperate at 1-4ohms. MTX 1501D might also work.
If you went with the 4ohm DVC your options would be much better and probably cheaper.... |
Silver Member Username: A3forme
Post Number: 394
Registered: Sep-04
|
Posted on Doh..sorry forgetting about 2 channel amps. Either way you should be able to find something that works |
Gold Member Username: James1115
Wilton,
Ct
Post Number: 3926
Registered: Dec-04
|
Posted on the JL isnt 1ohm stable but it will work well at 4ohms. How much do you want to spend? lets start there. |
Silver Member Username: A3forme
Post Number: 397
Registered: Sep-04
|
Posted on Sorry, your right. 1.5 ohm |