|
New member Username: 69vwvanWinamac, Indiana USA Post Number: 8 Registered: Aug-05 | What is the easiest way to cut a perfect, or less that perfect, circle into a box? |
|
Silver Member Username: Infinity_addictSanta Rosa, California USA Post Number: 145 Registered: Jul-05 | close to perfect: use a compass (one of those things that has a pointy end and an end for a pencil). a little less perfect: nail, string, pencil. the worst: just draw a circle perfect: make a computer do it! |
|
New member Username: 69vwvanWinamac, Indiana USA Post Number: 9 Registered: Aug-05 | Yeah, i need one of those compass things. Also Im buildin a sealed box that needs to be 1.0 cubic ft. My car is a hatchback so i was planning on making a slanted one. so far my diminsions are Height 15" Width 15" Top 9.5" Bottom 14". I'll be using 3/4 mdf and i was wondering if that was close to what i needed. |
|
Silver Member Username: RovinTrinidad & T... Post Number: 249 Registered: Jul-05 | Use the caculator on www.the12volt.com |
|
Silver Member Username: ScubasteveAnnapolis, MD Post Number: 484 Registered: May-05 | plunge router and cirle jig |