Type r's

Brandon Marthinsen Bronze Member Username: Xbranman Chattanooga, TN United States Post Number: 36 Registered: May-05	Posted on Monday, July 11, 2005 - 03:29 GMT i poasted which would be better 2 ohm or 4 ohm i got answered that 4 ohm is but in another post i read the 2 ohm is. which is better 2 ohm or 4 ohm?
Juelz Silver Member Username: Tbolt Collipark, GA Post Number: 108 Registered: Dec-04	Posted on Monday, July 11, 2005 - 03:31 GMT Neither is better. It depends on the amp and what ohm its stable at.
Brandon Marthinsen Bronze Member Username: Xbranman Chattanooga, TN United States Post Number: 37 Registered: May-05	Posted on Monday, July 11, 2005 - 03:36 GMT kicker 1200.1 or kicker 850.2?
Brandon Marthinsen Bronze Member Username: Xbranman Chattanooga, TN United States Post Number: 38 Registered: May-05	Posted on Monday, July 11, 2005 - 03:37 GMT 1200.1 1ohm stable 850.2 2 ohm stable
Juelz Silver Member Username: Tbolt Collipark, GA Post Number: 109 Registered: Dec-04	Posted on Monday, July 11, 2005 - 03:56 GMT if your getting 1 type r get the 850.2. If you get 2 get the 1200.1
Juelz Silver Member Username: Tbolt Collipark, GA Post Number: 110 Registered: Dec-04	Posted on Monday, July 11, 2005 - 04:00 GMT the 850.2 is just 4 ohm stable when you bridge it.
Brandon Marthinsen Bronze Member Username: Xbranman Chattanooga, TN United States Post Number: 39 Registered: May-05	Posted on Monday, July 11, 2005 - 04:08 GMT i am getting 2 so get thwe 1200.1 and 4 ohm subs and wire them to 1 ohm load?
Juelz Silver Member Username: Tbolt Collipark, GA Post Number: 111 Registered: Dec-04	Posted on Monday, July 11, 2005 - 04:14 GMT yep
rigger Bronze Member Username: Kicker Slave lake, Alberta Canada Post Number: 47 Registered: Jun-05	Posted on Monday, July 11, 2005 - 04:17 GMT i do not belive you can go as low as 1 ohms safely for the subs you will end up burning them out and 2ohms is better there is less resistence then 4ohms
Juelz Silver Member Username: Tbolt Collipark, GA Post Number: 114 Registered: Dec-04	Posted on Monday, July 11, 2005 - 04:32 GMT If your subs are svc you can wire them to 2 ohms. If they are dvc you can wire them to 1 ohm
Brandon Marthinsen Bronze Member Username: Xbranman Chattanooga, TN United States Post Number: 40 Registered: May-05	Posted on Monday, July 11, 2005 - 14:49 GMT they would be dvc also rigger said "i do not belive you can go as low as 1 ohms safely for the subs you will end up burning them out and 2ohms is better there is less resistence then 4ohms" is he right? which combo should i get the 4 ohm and kx 1200.1. or 2 ohm and get kx850.2?
Dave Richer Bronze Member Username: Audiobass10 Cape Coral, FL United States Post Number: 67 Registered: Jul-05	Posted on Monday, July 11, 2005 - 14:55 GMT "i do not belive you can go as low as 1 ohms safely for the subs you will end up burning them out and 2ohms is better there is less resistence then 4ohms" Nope, your amp is the only thing in Jeporady when you wire to 1 ohm. Since the Kicker is 1 ohm stable, there will be no problems. It's fine.
Brandon Marthinsen Bronze Member Username: Xbranman Chattanooga, TN United States Post Number: 41 Registered: May-05	Posted on Monday, July 11, 2005 - 14:57 GMT ill go with the 4 hom and wire it to 1 ohm and go with the kicker 1200.1 run about 1100 to each sub
Juston Bronze Member Username: Jb502 Omaha, NE Post Number: 70 Registered: Jun-05	Posted on Monday, July 11, 2005 - 18:40 GMT yea rigger is wrong, dave richer is right
Thrush Silver Member Username: Thrushdtd New York Post Number: 190 Registered: May-05	Posted on Tuesday, July 12, 2005 - 01:44 GMT dont get the dual 4 ohm get the dual 2 ohm and get an MTX amp 1000rms @2ohm
Brandon Marthinsen Bronze Member Username: Xbranman Chattanooga, TN United States Post Number: 47 Registered: May-05	Posted on Tuesday, July 12, 2005 - 03:29 GMT ive heard kicker r better amps from what i heard

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us