EBP?

 

Silver Member
Username: Langless28

Post Number: 277
Registered: Dec-04
i have winisd beta and the EBP of the woofer is 57.0 does it mean its better for ported or sealed?
 

Silver Member
Username: Langless28

Post Number: 278
Registered: Dec-04
also sean if u read this and have a little extra time, the box is 2.15cf its gonna be built smaller than that (space restrction) and the proper porportion of poly fill will put the cf to 2.15. its tuned to 33hz with a 4 by 11.25 inch port? hows that for a fz slope and stuff?
 

Bronze Member
Username: Miso

Slovakia

Post Number: 52
Registered: Feb-05
it is suitable in both enclosures,ported and sealed,because its right in the middle(0-50closed,around 50 both of them, 50and up bassreflex,approximately)
 

Gold Member
Username: Insearchofbass

Post Number: 3289
Registered: Jun-04
EBP - Efficiency Bandwidth Product. A rating that helps a builder determine whether a driver is suitable for a sealed or ported enclosure. EBP of less than 50 indicates the driver should be used in a sealed, 50 - 90 indicates flexible design options, over 90 indicates best for a ported enclosure.
 

Gold Member
Username: Insearchofbass

Post Number: 3290
Registered: Jun-04
need to know the theil small specs to get a look at the results but Ill take a peak for ya if you post them
 

Gold Member
Username: Taylor17

Kopperl, Texas

Post Number: 2405
Registered: Jan-05
How do yall find all this information about that kind of stuff?
 

Bronze Member
Username: Tbolt

Collipark, GA

Post Number: 65
Registered: Dec-04
http://www.bcae1.com/ I think. Im too lazy to read all that
 

Silver Member
Username: Langless28

Post Number: 279
Registered: Dec-04
sean its a polk momo 12" and the specs are

Resonant Frequency 31 Hz
Qms 13.66
Qes .54
Qts .52
Vas 2.25 cu.ft. / 63.71 L
Bl 14.2 Tesla Meters
Sd 80.39 sq.in. / 518.6 sq.cm
Xmax (linear) .37 in / 9.5 mm
Xmax (mechanical) .75 in / 19 mm
Le 2.42 mH
 

Gold Member
Username: Insearchofbass

Post Number: 3298
Registered: Jun-04
stick as close to that cf as possible with that port tune and youll be good to go
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us