Ported box options


New member
Username: Kujo

Post Number: 7
Registered: Jun-05
Hey Im having trouble deciding on a ported box for my two 10in alpine type r's (2ohm+2ohm). I will also most likely be powering them with the alpine MRD M605 (unless I can find a better amp for cheaper). Everyone tells me I should get a custom box, but the cheapest quote I could find in my area was above two hundred... more than I'm willing to spend. Its not like I'm going for a competition worthy set up or anything so I want to just get a prefab box. Here are the boxes I've been looking at (all dual 10" vented)-
1.5 cu ft, 34Hz
1.0 cu ft, 40Hz
1.2 cu ft, 45Hz
.75 cu ft, 48Hz

1.0 cu ft, 38Hz

1 cu ft, NA

1.1 cu ft, 34Hz

I'm not familiar with frequency tuning and all that stuff, so which box option would be best for my subs? I guess you could say Im going for a little more SPL than SQ... any other questions you need in order to help me please post... cuz this box thing is drivin me nuts!!

Silver Member
Username: Alpineuser

Winchester, TN

Post Number: 622
Registered: Mar-05
1.5^3ft 34hz is the one i would choose but you might want to call alpine and ask them which will work best.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us