Downfire postion

 

Bronze Member
Username: Bus212

Kingsford, Michigan Us

Post Number: 32
Registered: Jun-05
i was wondering if anyone has this in there truck? and does it sound pretty good becuase i dont have alot of room in my regualr cab ford so i was thinking about building a downfire box with the subs points twoards the roof of the truck.
 

Bronze Member
Username: Bus212

Kingsford, Michigan Us

Post Number: 33
Registered: Jun-05
and what thinkness of partical board should i use?
 

Silver Member
Username: Mikechec9

Chicago/atlanta

Post Number: 334
Registered: May-05
if it's a downfiring box, how are the subs firing toward the roof of your ride?
thickness should never be less than 3/4".
and i wouldn't use particle board. i used it on my last box and i had all kinds of problems with my screws and such. it is very soft and brittle. if you can, use MDF.
 

Bronze Member
Username: Bus212

Kingsford, Michigan Us

Post Number: 34
Registered: Jun-05
ya i got it confues with the upfire postion thats the kind of box im building so there facing twaords roof can i get mdf at any place that sells lumber?
 

Anonymous
 
yeah typically you can get MDF at any hardware store.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us