How to wire an dual 4ohm L7 10''


Unregistered guest
alright i want to wire my sub down to 2 ohms to get the most power out of my amp. My amp is 2 ohms compatible so how do i do this if i only have one L710". All of the diagrams i see only show how to wire to subs to 2 ohms. is this posible.

Silver Member
Username: Addicted2bass

Miami, Florida USA

Post Number: 870
Registered: Nov-04
yes its possile to wire the sub down to 2 ohm load...all you have to do is wire the sub in on the link Dual+Voice+Coil+-+4+ohms+x+2&image.x=18&image.y=13

Unregistered guest
i can make this nice and simple....connect the your wires running in to the black with a dot and the solid red. then run a jumper from the black with a dot to the solid black, and another jumper from the solid red to the red with a dot...make sure and test your resistance at the term cup to be sure.

kicker certified installer
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us