i hooked it all up, explod deck, amp and subs, BUT i cant get the amp to turn on. there is power from the battery terminal and the ground, i read 12V. all the wires have conductivity between them. no infringements on the wire. when i put a jumper from the battery terminal to the remote the amp turns on but i quickly removed it, so i thought it was the remote but theres conductivity all the way to the deck from the amp. WHATS THE PROBLEM????? the ground is fine. everything is brand new equiptment.
i didnt remove the remote. i just cant get power to the amp. but ive hooked everything up nicely.
Chadalac Muskalade
Unregistered guest
Posted on
like the ground is a sufficent ground, on the amp i put the negative of my volt tester, and i put the positive of my volt tester to the battery terminal on the amp, and i read 12V. but the amp doesnt turn on, its brand new. the remote line is hooked up to the deck, i checked both sides of the wire and there is conductivity. So i tried to see if i could turn it on just by jumping a wire from the battery to the remote on the amp, and it turned on. but its not very good for it so i took it off, just for a test, so i clasified it as a remote problem. I just cant get it. what is the problem? STILL NO POWER TO THE AMP, deck turns on fine.