Help! Is my sub box going to work!

 

New member
Username: Rhendric

New London, WI US

Post Number: 1
Registered: May-05
I was wondering if I have a single box and I want to put 2 10's in the box am I better off seperating the box in half or can I port the box with a single port in the middle. I was also wondering if the specs on my subs say I need 1.0 cu ft min. If I have two subs and I have 1.7 cu ft inside my box is this enought to have a sealed box. Or am I better to port the box. The box is very tight and I don't know how to tune the box. Please help I don't want the setup to sound like sh@t. Thanks
 

Silver Member
Username: Byrumjr

Post Number: 224
Registered: Jan-05
For a sealed box that will work. I like separating the box in half because it's better on the sub if one goes out. If you port the box you need to be right on the cubic feet for your sub and tuned right also.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us