What do i use to push my 10W3v2's??

 

Bronze Member
Username: Gavbo211

US

Post Number: 32
Registered: Jan-05
I need help finding the right amp to push my two JL Audio 10W3v2 they are dual 4ohm and 300 watts rms apiece. I can go with either a mono or 2 channel amp doesnt matter but it seems like there are so many unheard of brands out there that are awesome im just lost. Thanks in advance.
 

Silver Member
Username: Araknid

BOCA , FL U.S.

Post Number: 526
Registered: Nov-04
http://www.woofersetc.com/product.asp?0=295&1=296&3=3576

2 DVC drivers with Voice Coils in Parallel / Parallel
Connecting the voice coils of each driver in parallel (+ to +, - to -) and the drivers themselves in parallel (+ to +, etc.) will result in the following impedances:
Dual-6 Ohm Subwoofers: 1.5 Ohms
Dual-4 Ohm Subwoofers: 1 Ohm
Dual-2 Ohm Subwoofers: 0.5 Ohm


1kB GIF

 

Silver Member
Username: Araknid

BOCA , FL U.S.

Post Number: 527
Registered: Nov-04
sorry couldnt get the picture to come up

http://www.jlaudio.com/tutorials/wiring/index.html#1dvcs

4th one down
 

Gold Member
Username: Suleman36

Post Number: 1295
Registered: Feb-05
Just get a 500/1 and call it a day.
 

Bronze Member
Username: Vtecpower

Post Number: 26
Registered: Aug-04
if you can't stretch to a 500/1 just get a Diamond Audio D3 600.1 650W RMS @ 1 Ohm lifetime warranty if installer by a Diamond dealer, will pound all day and all night.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us