|
Gold Member Username: InvainMichigan United States Post Number: 2335 Registered: Aug-04 | I know millions of people ask questions like this, and it gets annoying, but I've gotten my list down to two subs: ID MAX 12" SoundSplinter RL-P 15" I'll be pushing whichever sub I get with an Orion HCCA 250g4, wich will give 800-900 wrms at 1 ohm. With that wattage, which sub would you guys guess will be the loudest? No stupid guesses, I want experienced input from people that know what their talking about. I know the 15" has an advantage because of cone area, but the ID MAX's have pretty high displacement, and can belch out some very high spl numbers if done correctly. |
|
Gold Member Username: InvainMichigan United States Post Number: 2341 Registered: Aug-04 | Annnyyyy body. |
|
Gold Member Username: InvainMichigan United States Post Number: 2344 Registered: Aug-04 | Where the he.ll is Jonathan when I need him? |
|
Gold Member Username: Jonathan_fGA USA Post Number: 3907 Registered: May-04 | I don't think Soundsplinter uses LMT yet, but I've heard good things about their current lineup. It's a tossup really. Haven't dealt with their stuff that much to be able to guarantee you anything. |
|
Gold Member Username: InvainMichigan United States Post Number: 2358 Registered: Aug-04 | Dang, lol. Not the kinda answer I wanted to hear. I know it's a hard question to answer, but it's so hard to make up my mind. |
|
Gold Member Username: InvainMichigan United States Post Number: 2359 Registered: Aug-04 | Even though the ID MAX does have such a larger cone area for a 12, the xmax's are pretty close for the RL-P and the idman. I figured that with the rl-p being a 15, that it would probably be able to reach higher db's with amount of power I'll be pusing. |
|
Gold Member Username: Jonathan_fGA USA Post Number: 3908 Registered: May-04 | Most likely it will, but of course I'm not making any promises about anything I haven't used ;). |
|
Gold Member Username: InvainMichigan United States Post Number: 2361 Registered: Aug-04 | Alright, that's smart I guess. Thanks Jon. |
|
New member Username: Mikechec9Chicago/atlanta Post Number: 6 Registered: May-05 | http://realmofexcursion.com/videos.html |
|
Silver Member Username: AlpineuserWinchester, TN Post Number: 326 Registered: Mar-05 | i have heard great things about the rlp-15 through the internet but no first hand experience. dont they use the tc3 motor? |
|
Gold Member Username: InvainMichigan United States Post Number: 2390 Registered: Aug-04 | Not exaclty sure which Tc motor it is, but all Sound Splinter subs use TC Sounds motors. |
|
Silver Member Username: AlpineuserWinchester, TN Post Number: 329 Registered: Mar-05 | it is based on the tc9 motor and this is from www.soundsplinter.com |