Input signal?


Bronze Member
Username: Vwgn

Post Number: 16
Registered: Apr-05
my amp says max input signal is 4.7v my head unit is 5 volts...? maximum sensitivity (on amp) gain screw is 220mv to 6v? where should i set it at? please explain...thanks

Silver Member
Username: Solacedagony

New Jersey US

Post Number: 383
Registered: Oct-04
You should probably take it to a shop and have them set it for you. Once the gain is set, you don't touch it.

Gold Member
Username: Fishy

Tamarac Ft.Laud, FL USA

Post Number: 1123
Registered: Sep-04
That doesn't make much sense. If the amp's max sensitivity is 4.7v why would they have printed 6v on there? What amp do you have?

You'd probably be just fine with the 6v setting.


Bronze Member
Username: Vwgn

Post Number: 17
Registered: Apr-05
jbl gto series 301.1.its not that loud when its at 6v seting but it hits the hardest in between 220mv and 6v? will that damage nything if i set it that way or is that where it should be?
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us