So whats up with Wiring

Ice Bronze Member Username: Thumper Richmond, VA U.S.A Post Number: 50 Registered: Apr-05	Posted on Wednesday, April 27, 2005 - 20:10 GMT im starting to get a little worried about this whole wiring issue. In order to tell how many amps your amp is putting out, you just look at the fuse/s and add them together. So if it equals about 320 amps, what size wire would i need. Would 0 gauge do me fine if its less than 15'. Im not sure how long my wire needs to be, but i know its under 15'
Ice Bronze Member Username: Thumper Richmond, VA U.S.A Post Number: 52 Registered: Apr-05	Posted on Wednesday, April 27, 2005 - 20:16 GMT The power wire will run to a distribution block. I was thinking 0 to 4 but i might go for 0 to 2. what do you think
Ice Bronze Member Username: Thumper Richmond, VA U.S.A Post Number: 53 Registered: Apr-05	Posted on Wednesday, April 27, 2005 - 20:20 GMT gotta go to work, ill be back on tonight.
Loc_out Bronze Member Username: Loc_out Post Number: 88 Registered: Feb-05	Posted on Wednesday, April 27, 2005 - 20:21 GMT what about 0 and 4...
Ice Bronze Member Username: Thumper Richmond, VA U.S.A Post Number: 55 Registered: Apr-05	Posted on Wednesday, April 27, 2005 - 20:27 GMT From the battery 1) 0 ga input--To the amp 2) 4 ga output OR 1) 0ga input--2) 2ga output
Ice Bronze Member Username: Thumper Richmond, VA U.S.A Post Number: 56 Registered: Apr-05	Posted on Wednesday, April 27, 2005 - 20:28 GMT ......for the distribution blocks
Loc_out Bronze Member Username: Loc_out Post Number: 92 Registered: Feb-05	Posted on Wednesday, April 27, 2005 - 22:08 GMT I like this setup 0 ga input--To the amp 2) 4 ga output
howie feltersnatch Silver Member Username: Goon Post Number: 148 Registered: Feb-05	Posted on Wednesday, April 27, 2005 - 22:36 GMT um...is a distribution block nessacary? or only in certain cases? goon

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us