New member
Username: Rickeyd87

Post Number: 7
Registered: Mar-05
im building a box for my SX15 that should be arriving in a day or two...i had someone help me with the box design and i cut all the pieces out that i needed...but someone was saying that my first box design would only have 35 square inches for the ported i made another design which would give me around 67 square inches....then someone said that my tuning would be too high. the links below will show you my box designs i made....tell me if i should use the first one, the second one, or make a few changes to either of trying to tune it to between 28-36hz...

Box Design 1
Box Design 2
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us