Connectin 6x9 Speakers to my amp


New member
Username: Buchanan

Post Number: 1
Registered: Apr-05
I have just got myself a JBL GTO 2000 400 watt amplifier, and a GT4-10 10" Sub. I have already installed a set of 300 watt 6"x9" three-way speakers into my partial shelf, and was wondering if I could connect my 6"x9"'s to my amp. Is this a good idea or not as I am new to all this.

Bronze Member
Username: Msully701

Stratford, Connecticut US

Post Number: 46
Registered: Apr-05
usually people get 1 amp for there speakers and 1 amp for the subs because subs naturally(depending what you get normally the watts on subs should be higher) have more watts then regular speakers

Silver Member
Username: Joebruce


Post Number: 225
Registered: May-04
If that amp is 4ch then yea.You could hook up your 6x9s to two of the ch. then bridge the other two and hook your sub to it,but make sure if the sub is single 2ohms or dual 2ohms that your amp is 2ohm stable bridged.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us