Me and a buddy are gonna start stripping the inside of a Jeep Cherokee. First, were gonna rip everything from right behind the driver's seat and back out, clean to the metal. Then we're gonna insulate it with something, probably spray a ton of liquid eDead on. Maybe something else if you got any-ideas. We're gonna weld some square tubing behind the seats for wall studs, and then slap up some thick sheet wood, and fill the inside of the wall with foam or something. Replace all the glass with plexi glass, (lift if a little and put some 30's or 40's on it, ), and we're ready for equipment. First, we'll build a custom bracket to mount more than one alternator, and build a box for a bank of batteries in the back. We're gonna experiment with running some kinda tube under the jeep and running the main power line from the alts to batteries through that, so we know the line stays safe and to get it outta the way. Now, we need to decide on what to run. We wanna try some medium priced stuff first, probably the cheaper the better, and move our way up. Thinking 2 or 4 18's, and then we'll need amps. Any suggestions?
Not sure. Not a ton though. We can do everything for free pretty much, my friend has a lot of scrap cars sitting around. Only things we're really gonna have to buy are subs and amps. Of course we're gonna need the bank of batteries and wiring too...
Hey Fishy and Pharoh I was thinking right along the same lines as you guys as soon as I started reading this lol! Hey Nick how about 4-atlas 15's run with a JBL 1200.1 at 1ohm that would SLAM! I have my avalanche in a jeep cherokee , systems in those cars sound very good.
That amp would probably kill those Atlas IB. After reading a bit, Ascendant only recommends 200 watts each free air. 2 Avalanche 18's IB might work. Not sure how they'd do in an Infinite baffle although for 2 speakers of that size the well sealed rear of a Cherokee might just be considered a "large" enclosure.