i have 2 kicker comps svc 8ohm if i wire them in parrell they will recive a 4ohm load right but the amp i have says 2ohm stable mono, would this set up work or would i have to wire my subs differently
It will work. That just mean's that the lowest ohm's your amp can handle is 2 ohm's.
Anonymous
Posted on
ok i just figured it up if i run the subs mono off the amp i have at 4ohms the amp will be putting out a little over 200 watts but my subs are rated at 150 RMS do u think this would be over powering the subs too much since there so small
Anonymous
Posted on
ohh ya the subs are in a ported box if that makes any difference