Correct me if im wrong.....


the 13w7 is dual 1.5 ohm coils right? well then if you wired them parallel wouldnt that go down to a .75 ohm load which is not suitable for the jl 1000/1 amp because its made for 1.5-4 ohm loads.... could spomeone help me out? thanks

Bronze Member
Username: Bobo123

Post Number: 18
Registered: Jan-05
that is correct, but if you wire it in serries you get a 3 ohm load... now you amp and sub are both happy

okay then i need another if you wire them series doesnt that give 1000w RMS to each coil totaling out to 2000w rms?

thanks for your response by the way

Silver Member
Username: Southernrebel

Monroe, Louisiana USA

Post Number: 365
Registered: Mar-04
nope...the coils can handle 1000wrms altogether.

doesnt matter if you wire it series or parrallel...its still 1000wrms.

you thinking about wireing batteries together...if you put 2 12V's in parrallel you will get 12V output. If you wire em in series you will get 24V.

JL slash series have a regulated power supply, so the ohm load doesn't change power. JL 1000/1 gives you 1000W between 1.5 and 4. There E series is not regulated, so generally they give twice the power at 2 ohm that they give at 4.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us