Xtant 1001d blowing fuses

 

New member
Username: Torxim

Post Number: 1
Registered: Feb-05
I have one of the old xtant 1001d (1000w beauty.) It used to work perfectly, but now it blows inline fuses whenever i try and power it on. I disconnected everything except the power, remote lead, and the ground, and it still blew the in line. The amp has LED lights, and what happens is the red power light comes on, then a blue LED flashes that indicates Low Voltage, then the inline blows. Anyone have any ideas what it could be? I miss my bass :-(
 

Silver Member
Username: Lbeckner

Tulsa, Ok Usa

Post Number: 309
Registered: Oct-04
You disconnected speakers and rca's too? If so then its probably a bad amp. Hope its under warranty.
 

New member
Username: Torxim

Post Number: 2
Registered: Feb-05
well it WAS working perfectly, then something in the trunk bumped into it and this happened... would a squashed power lead cause the low voltage? i'm wondering if the same thing would happen to the inline fuse if you were using like 16GA power cable with a 1000w amp
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us