Cutting 0/1 Gauge Wire

 

Silver Member
Username: Solacedagony

New Jersey US

Post Number: 267
Registered: Oct-04
I just wondered what tool everyone here used to cut their 0/1 gauge wire. That's some immensely thick stuff.
 

Bronze Member
Username: Kklagge

Post Number: 64
Registered: Dec-04
Bolt cutters work quite nice!
 

Silver Member
Username: Invain

Michigan United States

Post Number: 440
Registered: Aug-04
Just take a razor blade and carefully rotate it all the way around the diameter of the wire, cutting a groove. Make sure you use something razor sharp though. And don't cut your finger half off like I did.
 

Silver Member
Username: Hdubb

Farmington, Nm Usa

Post Number: 622
Registered: Nov-04
yes, a razor would work, or if you have strippers that have cutters on them to, most do, just rotate it in that and it will do the trick. also they make cutters for that type of stuff, they are made to cut battery cable. very wierd looking.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us