Like

Screwing in a sub question (glass what do you do)

 

Big D
Unregistered guest
Ok, so I am going to mount my sub in my custom box ...my question is what size screw to use (length). Is it ok for the screw to break through the front baffle? or would I want it to penetrate only half of the front baffle? Or am just being ridiculous and shouldn't worry about this?
 

Silver Member
Username: Invain

Michigan United States

Post Number: 406
Registered: Aug-04
Well, I think you shouldn't worry about it really. My screws go all the way through. You want the sub to be well secured onto your box, or it could rattle or start to jar loose.
 

ThatGuyYouKnow
Unregistered guest
Id like to Bolt mine in... but almost in possable :-(
 

Silver Member
Username: Jmloughrey

Farmington, CT

Post Number: 919
Registered: Jul-04
yea i use like 1.5-2" screws on my subs...never had any problems...its alright if it breaks the front baffle, remember...predrill with a smaller bit then the screw...
 

Big D
Unregistered guest
Thanks, for the help fellas
 

Silver Member
Username: Hdubb

Farmington, Nm Usa

Post Number: 601
Registered: Nov-04
yes always predrill or you will split the wood and it will chip off. also use a screw bit that has a protective sleeve, or you puncture a whole ind the surrounding.
 

Gold Member
Username: Jonathan_f

GA USA

Post Number: 3166
Registered: May-04
T-nuts are the best option. Screws should go all the way through the box, you should have as many threads as possible going through.
« Previous Thread | Next Thread »

Facebook

Shop Related Deals

Directory

Main Forums

Today's Posts

Forum Help

Follow Us