New member Username: Superx727
Post Number: 1
Registered: Jan-05
|
Posted on What kind of Amp do you recommend for a Audiobahn ABP10T subwoofer box enclosure?
I can afford to spend $200 at the most |
New member Username: Rancid
Stockton,
Ca
Us
Post Number: 7
Registered: Jan-05
|
Posted on how many watts and ohms is t
he sub |
New member Username: Superx727
Post Number: 2
Registered: Jan-05
|
Posted on heres all the info:
Dual 10" Molded, Texture Injected Poly Cone
50 oz. Strontium Magnet
2" 4 Layer ASV Voice Coil
Power Handling : 600 Watts RMS
Sensitivity : 101 dB
Frequency Response : 30Hz -150Hz
Impedance : 4 Ohm Stereo
|
New member Username: Rancid
Stockton,
Ca
Us
Post Number: 10
Registered: Jan-05
|
Posted on for under $200 i would recommend the profile AP1200 for about $169 or the kenwood KAC-7201 for about $200 |
New member Username: Superx727
Post Number: 3
Registered: Jan-05
|
Posted on I found the Kenwood for 100$ on EBAY, is that the best I can find for under $200 even on EBAY |
Bronze Member Username: Rancid
Stockton,
Ca
Us
Post Number: 12
Registered: Jan-05
|
Posted on try looking for for an audiobahn A8002T or a fosgate punch P5002 or P6002 |
New member Username: Superx727
Post Number: 4
Registered: Jan-05
|
Posted on Is that enough to power my subs? |
New member Username: Superx727
Post Number: 5
Registered: Jan-05
|
Posted on Glasswolf, do you agree with this? is there anything you would suggest? |