So would the Kicker KX850.2 be good for 2 1000 Watt RMS subs or is that too weak cuz I don't want to run the subs huge or anything just enuff for people in the car. I don't know Im new and instead of doing like my friends and letting the store tell me what I need I would like to get a little info first but I don't know where to start.
Alum 12Q. I got them and a box for 125 cuz my friend could no longer use them and everything is brand new never been used. Someone I know is using a legacy 2400 Watt amp to power the exact same thing but I hear those are crap. I don't know anything about this stuff so everywhere I go and ask I get a big hastle or get told all this garbage.
You can get 2 of those kicker amps, one for each sub. In fact, I think it'd be a great setup. I think it would be quite a bit of money for those 2 though. Since you already have those audibahns I can suggest to go with the audiobahn A18001DT amp, it's around $400 on eBay and will give those subs exactly what they need. Also, a cheaper alternative with less power is the all-loved JBL 1200.1. It would give you ~650-700W per sub, that should also be enough. In this case, I actually think you should find the auction on eBay for a jbl amp. They have a few that put out 1200W x 1, so any of them is fine. If you have any questions about buying on eBay just ask.
Wiring the subs is pretty easy. Audiobahn has the diagrams in the "tech support" section. Those subs have dual lug terminals, which means that instead of having 1 positive and 1 negative terminal for each coil, then have 2 for each, making it easier to wire. If you lay it down, magnet pointing up, you see 4 terminals on each side. The 2 on the right are pos and the others are neg. Go to the audiobahn.com and look for the diagram.