Ok i have read on the JL audio website that you can set your gains more accuratly by using a DMM and a test tone cd. i was wondering if anyone knows of a chart for MTX Thunder amps so I can see what the voltage would be. If you look at the tutorial on the JL site it has a chart for JL Slash and E series amps. I have a MTX 311d. If anyone knows that would be a lot of help.
generally I use an oscilloscope to accurately set gain, but that JL guide should give you an idea of how to do it if your meter reads "true RMS" values for AC circuits
Help2
Unregistered guest
Posted on
Amp does 200wRMS at 2 ohms...so...
200*2=400 square root of 400=20 set your amp to 20 volts using the same steps on the JL thingie.
Help2
Unregistered guest
Posted on
Amp does 200wRMS at 2 ohms...so...
200*2=400 square root of 400=20 set your amp to 20 volts AC using the same steps on the JL thingie.