Equalizer rca

 

Bronze Member
Username: Munkyjojo

Winamac, Indiana

Post Number: 58
Registered: Mar-04
i have an alpine equalizer. my problem is that everything is done with rcas. the input, speaker output and subwoofer. my queston is, what can i do about turning the speaker output rcas into regular speaker wire? also, there is only one set of rca's for rear, and another for front. its just that I only have a stock alternator so i dont want add another amp for my speakers.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5921
Registered: Dec-03
the EQ is pre-amp only.
you need amplifiers for all channels used.
 

Silver Member
Username: Carguy

Post Number: 426
Registered: Nov-04
You can buy a low powered amps that'll work within your stock alternator's limit. It'll still sound a lot better than your HU.
 

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5941
Registered: Dec-03
a JBL P80.4 would do the job at 40wRMS x 4 @ 4 ohms
pretty cheap, reliable amp for 4 channel use.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us