Ported box question


Silver Member
Username: Iamduff_87

Michigan America!

Post Number: 256
Registered: May-04
ok i have 1 12" V-Max. i was planning on building a ported box with 2 slot ports. the site says 2.6cu ft for the sub. is that 2.6cu ft before you subtract the port volume and sub displacement? therefore the actually size would be smaller ?? also what is that tuned too...and would that be good for hiphop / rap

Gold Member
Username: Glasswolf

NorthWest, Michigan USA

Post Number: 5526
Registered: Dec-03
2.6cu ft net volume, after taking out the driver and port displacement.
tune it to about 35Hz

Silver Member
Username: Iamduff_87

Michigan America!

Post Number: 257
Registered: May-04
thing is it doesnt say NET. if it did i would have assumed that. but it says Total Box Volume.

also i already designed it with a total volume of 2.6 before displacement and converted the round ports into the slot ports. would i make the ports a little longer or shorter to created 35HZ instead of 33HZ? I will give you deminsions when I get them ... they are in my locker at school .

Gold Member
Username: Insearchofbass

Post Number: 1018
Registered: Jun-04
you would go shorter to go to a 35 hz tune compared to a 33 hz tune

Unregistered guest
Download WinISD
That program rules.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us