Bronze Member Username: IgotpenguinzMi Post Number: 16 Registered: Oct-04 | What should i set my phase shift at it goes from 0(degrees) to 180(degrees) What should I set my subsonic frequency and gain at? And finally what should i set my bass boost frequency and gain at. If it helps I have a 1200watt audiobahn amp (I know YUK!) 1ohm stable, and 2 kicker solo-barics 12L7 both DVC 4ohm. |
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5210 Registered: Dec-03 | phase 0 ssf 20Hz gain, no higher than half. that needs to be set using the guide on bcae1.com bass boost at 40Hz, level of 0. LPF set to 80Hz. work toward 50Hz from there till ya like the sound of it. |
Anonymous | what is the phase shift for anyway, how can it help? |
New member Username: Pcgamer02Post Number: 5 Registered: Oct-04 | How do you like your setup, I'm thinking of getting the exact same thing. |
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5234 Registered: Dec-03 | info on phase: http://sl.wus0.com/quclk.go?rd=http://www.bcae1.com/compleximpedance.htm&res=1&c rid=4cbfbaae6e2ef51d&pos=1&mr=25&qu=phase%20shift |
Bronze Member Username: IgotpenguinzMi Post Number: 18 Registered: Oct-04 | Thinking about getting the L7s? If your looking at DVCs look at RE's I've been hearing good things about them and I think all of them are DVCs |
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5246 Registered: Dec-03 | the voice coil configuration has no effect on how the subs sound. It's strictly there to match load to the amplifier you choose. almost all subs now come in two setups. single coil 2 and 4 ohm, or dual coil 2 and 4 ohm, or single 4 ohm coil and dual 4 ohm coils. |