New member Username: CrankdbassPost Number: 1 Registered: Oct-04 | How much watts does my amp need to be if i want to run a 400 watt sub. and would my amp need to be mono or 2 channel coz i'm not quite sure what the difference is! please help!!! |
Silver Member Username: Zacdavis~Post Number: 205 Registered: Sep-04 | is your sub 400max or 400rms? is your sub dual voice coil or single and what ohm is it? |
New member Username: CrankdbassPost Number: 3 Registered: Oct-04 | 400 watts peak power I think it's a dual voice coil and it's 4ohm |
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5192 Registered: Dec-03 | if the sub is dual 4 ohm coils, and you have one sub, find a mono amp rated for the RMS handling of the sub @ 2 ohms. |
New member Username: CrankdbassPost Number: 4 Registered: Oct-04 | Why a mono amp and why does the amp need to be 2 ohms? |
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5235 Registered: Dec-03 | go read www.bcae1.com the entire site top to bottom. that'll answer most of your questions. read this, too: http://www.wickedcases.com/caraudio/amplifiers.html |
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5236 Registered: Dec-03 | Until you have a basic understanding of Ohm's Law, there's no very good way to answer your questions without confusing you. |
Silver Member Username: JeremycKunsan AfbSouth Korea Post Number: 147 Registered: Jun-04 | Who's Ohm, and why does he have a law? I want a law. |
Gold Member Username: GlasswolfNorthWest, Michigan USA Post Number: 5269 Registered: Dec-03 | I think they named your law "Murphy's" |
New member Username: CrankdbassPost Number: 7 Registered: Oct-04 | thanx! |