|
New member Username: DatboypOdessa, TX USA Post Number: 6 Registered: Oct-04 | I've got a JBL bp600.1 amp. I'm getting two 10" Alpine Type-R's. Would it be best to get the subs at 2 ohm or 4 ohm? |
|
Silver Member Username: Audiobahn_manFreakmont, MI Post Number: 236 Registered: Aug-04 | SVC or DVC? If SVC, i would do 4 ohm, if DVC, i would do also do 4 ohm, this way you have a 2 ohm for the SVC, and a 1 ohm for the DVC, and the amp is rated to be stable at 1 ohm if you didnt know that...or i believe you could do duel 2 ohm for the DVC and come out with a 2 ohm load, dont know bout that one brain is playing tricks on me...lol |
|
Silver Member Username: InsearchofbassPost Number: 977 Registered: Jun-04 | if these are dual voice coils each then you would want dual 2 ohm type r's for a two ohm bridge at you amp for full power |
|
Silver Member Username: InsearchofbassPost Number: 979 Registered: Jun-04 | i picked the 2 ohm bridge because the amp wont have to work as hard at 2 ohms as at 1 ohm and ive heard the jbl amps had some issues at 1 ohm with heat (this amp puts out the same power at 2 ohm as 1 ohm) heres a link with specs of your amp http://www.cardomain.com/item/JBLBP6001Z |
|
Silver Member Username: InsearchofbassPost Number: 980 Registered: Jun-04 | heres a link to rockfords wiring wizard http://www.rockfordfosgate.com/rftech/wiringwizard.asp |