|
Silver Member Username: Aman2005Post Number: 133 Registered: May-06 | PLease please any one tell me the dimensions for the enclosure of Two Type R.. to get a maximum loudness and a reasonable SQ. Please don't forget to tell me how to tune a box. I am a newbie. If you are going help me, help me in detail |
|
Silver Member Username: Scott_debakerPittsburgh, P.A. U.S.A. Post Number: 474 Registered: Feb-06 | ported box what size type rs? |
|
Silver Member Username: Aman2005Post Number: 134 Registered: May-06 | Hi SPD, thanx for ur suggestion. I've two 10" type r's 4 + 4 ohm Dvc SWR 1042D Hope to get help from you |
|
Silver Member Username: Scott_debakerPittsburgh, P.A. U.S.A. Post Number: 475 Registered: Feb-06 | http://i6.tinypic.com/14 http://i6.tinypic.com/1442q6s.jpg42pux.jpg http://i6.tinypic.com/1442q9t.jpg http://i5.tinypic.com/1442q12.jpg if u want that box cut 2 30x23 2 23x9.5 1 9.5x28.5 1 11x30 1 divider 9.5x21.25 ports 2 9.5x20 or build a box big as u can fit |
|
Silver Member Username: Scott_debakerPittsburgh, P.A. U.S.A. Post Number: 476 Registered: Feb-06 | here 2 top bottom 30x23 2 sides 23x9.5 1 front 11x30 1 divder 9.5x22.25 1 back 9.5x28.5 2 ports 20x9.5 it goes top bottom first then both sides but sides on top on the top an bottom then put both sides on then put bac on then ports in then the front an its done |
|
Silver Member Username: AdddisorderWest palm, Florida Post Number: 351 Registered: Jan-06 | search around on some box building sites (google) make each chamber the size that alpine recomends for that sub being ported. youll probly want it tuned 32-35hz |
|
Silver Member Username: Aman2005Post Number: 135 Registered: May-06 | SPD, thanks for telling the dimensions, But I could not understand how to make the port. Please clarify |
|
Silver Member Username: Aman2005Post Number: 136 Registered: May-06 | I tried those dimension and tried to draw a sketch on the paper. But couldnt understand. If you've time, can you please give me a complete procedure and tell me that which dimension is for which side. If possible a diagrmatic representation will be appreciated |
|
Silver Member Username: Scott_debakerPittsburgh, P.A. U.S.A. Post Number: 483 Registered: Feb-06 | 2 sides 23x9.5 1 divider 9.5x22.25 1 back 9.5x28.5 1 top 1 bottom 30x23 1 front 11x30 2 ports 20x9.5 front gos on last it gos liek 2 sides an divder on the top an bottom then bac an then once its all 2geather with the box open from the front make 4 2 inch spaces put them on 1 side box upwards an take the port an lay it on top of spacers an screw it an then do other side once thats done put the front on |
|
Silver Member Username: Scott_debakerPittsburgh, P.A. U.S.A. Post Number: 485 Registered: Feb-06 | aim me @ shadylimitedx |
|
Silver Member Username: Aman2005Post Number: 137 Registered: May-06 | SPD, do you have any yahoo id? SO we can talk there? |
|
Silver Member Username: Aman2005Post Number: 138 Registered: May-06 | SPD, do you have any yahoo id? SO we can talk there? Can you please make a diagram for me to follow the instructions for making a box? I am unable to understand the measurements, If I cut the wood as yousuggested the size, how will I build the box |
|
Silver Member Username: Aman2005Post Number: 139 Registered: May-06 | Can any one upload a skect or diagram for two type r subs 10 " round DVC 4ohm? tuned at 32 - 35 hz for maximum loudness, if possbile, a tuning frequency for maximum loudness and reasonable SQ. ]Please I am a newbie, please help me out!!! |
|
Silver Member Username: AdddisorderWest palm, Florida Post Number: 380 Registered: Jan-06 | search on google, most people here dont have time to compleatly walk you threw your entire install with every little detail |
|
Silver Member Username: Aman2005Post Number: 140 Registered: May-06 | dope, I did the search on google, but couldnt find anything. If people dont have time, why they are here to help others?? They are spending their free time here because they want to tell others about their passion and knowledge |
