Bronze Member Username: TallaballaLino Lakes, MN United States Post Number: 15 Registered: Jan-07 | Audiobahn amps decent or are they crap i was looking at http://http://techronics.com/index.cfm?fuseaction=product.display&Product_ID=393 9 The Audiobahn A8000V 1-Channel Amplifier Here are the specs on that amp Mono subwoofer car amplifier 400 watts RMS x 1 at 4 ohms (800 watts RMS x 1 at 2 ohms) 2-ohm stable Variable low-pass filter (50-120 Hz, 18 dB/octave) Bass boost (0-18 dB at 45 Hz) Variable subsonic filter (20-50 Hz) Selectable phase shift switch (0 or 180 degrees) Cooling fan with air intake Built-in digital voltmeter MOSFET power supply Preamp- and speaker-level inputs Preamp outputs Fuse rating: 30A x 2 4-gauge power and ground leads recommended wiring and hardware not included with amplifier Dimensions: 11-1/8"W x 2-5/16"H x 13-3/8"D 1 year Techronics.com warranty and i am going to have to power my two kicker cvrs here are the specs on that Outer Frame Diameter: 12 1/2" 4ohms Nominal Impedance Power Handling:800W Peak/400W RMS Sensitivity (SPLo dB @ 1W, 1m): 86.7 Effective Frequency Range: Hz 25-500 Mounting Depth: 6 3/16 " Hole Cut-Out Diameter: 11 1/8 " Equivalent Volume: 3.37Vas 47.05oz Magnet Is this a good match or should i look at another amp anybody have any suggestions |
Silver Member Username: HockeyknightSt. Paul, MN Post Number: 735 Registered: Apr-06 | thats not a bad budget starter amp but they are in no way the best you can get.....if thats all the $$$ you have than that amp wont be bad........Matt how cold is it in lino???? its like 15 below around blaine!!! |
Platinum Member Username: Chaunb3400Huntsville, Alabama U.S. Post Number: 11303 Registered: Jul-05 | that amp will not work with those subs...the amp will have to be 1ohm or 4ohm stable and produce 800-1000rms.. |
Gold Member Username: Matt12490California USA Post Number: 1633 Registered: May-05 | Link doesn't work, but I'm pretty sure that is the amp that everyone was buying on a budget a while ago. Everyone who bought it was happy and it put out rated power. If you're on a budget then that amp is DECENT, but I would step it up a little bit. |
Gold Member Username: JuliobSanto DomingoDominican Re... Post Number: 4073 Registered: Dec-05 | what chauncey is trying to say is that he needs audiobahn a8002V to work with those subs. If you don't like it, then grab a 800-1000w rms amp at 1ohm or 4 ohms |
Bronze Member Username: TallaballaLino Lakes, MN United States Post Number: 19 Registered: Jan-07 | thanks for the help guys do you think a Hifonics BXi1606D 1-Channel Amplifier would work i know it has a lil more power but i hear that hifonics amps are over rated here are the specs on it 1-Channel Mono-Block Operation RMS Power (4 ohms) : 550 watts x 1 chan. RMS Power (2 ohms) : 1100 watts x 1 chan. RMS Power (1 ohm) : 1600 watts x 1 chan. Signal-to-Noise Ratio >95 dB Super D-Class Topography Ultra-Fi MOSFET Outputs Illuminated Hifonics Logo PMW MOSFET EXVP (Exponential Vari-Power Supply) SPC Twin Turbo-Torroids with Simpatico Coil Design Fully Adjustable Accu Cross Crossover Includes: 24 dB Subsonic Filter (Adjusts 15 Hz - 50 Hz) Bass Boost: Variable Bass Equalization (+18 dB @ 45 Hz) Remote Bass Control Included Balanced Line Inputs with Optional Hifonics MM-BLD-1 Gold RCA Line Outputs Permits Amplifier Daisy-Chaining 4 Gauge Power Connectors Dimensions: 13.77"L x 10.39"W x 2.63"H 1-year Techronics.com warranty would this be a good amp or do you guys have any better suggestions Also since these subs can be 2 ohm or 4ohm and i am going to get them installed by best buy or if you guys have another place that installs susb and amps could you reccomend what kidn of amp am i looking for am i supossed to look at the 1 ohm 2 ohm or 4 ohm on the amps specs because isnt it right that if best buy installs my subs in a parallel that it will be a 2ohm load so then should i look at the 2 ohm on the amps or not? Can someone explain it to me |
Silver Member Username: QuigPittsburgh, Pa Us Post Number: 272 Registered: Sep-05 | i had a simliar amp... audiobahn a8002t... broke twice... but powered my p3s OK... the first time the power block on the amp look like it blew up... and the second time... the rca input like fell off and was jiggling around... and also i think an iternal fuse blew...the amp wuld power on, like the illumnating lights... but the power light wouldnt come on and no output. |